Lire la meme chose en:    Français  Deutsch  Русский  English  
Rechercher:
Article ID #   
Recherche avancée:
Donnez votre avis sur les articles techniques de notre site:
Le niveau technique des articles 
L'exhaustivité de l'information dans les articles 
Avez-vous trouvé la réponse à votre question?* 
La présentation de l'information 
Les remarques importantes pour les articles* 
diminuer le volume
augmenter le volume
mettre en évidence les informations principales
améliorer la structure
améliorer la présentation
augmenter la quantité d'articles
pas de remarques
Mes réponses sont attribuées à la section* 


 
Recherche:  
Aide à la recherche Article ID # :     
 

Kaspersky Anti-Virus 6.0 for Windows Servers Enterprise Edition

 

Kaspersky Anti-Virus 6.0 for Windows Servers Enterprise Edition peut-il être installé sur un serveur en cluster ?

 ID Article: 1490    Autres langages:  Deutsch  Русский  English      Voir pour 7 jours 1    Dernière modification le 17.12.2009 15:18 Version imprimable

Concerning to Kaspersky Anti-Virus 6.0 for Windows Servers Enterprise Edition

Yes, it can. Kaspersky Anti-Virus 6.0 for Windows Servers Enterprise Edition can be installed to a cluster server (Microsoft Server Cluster). Two installation modes are supported Active/Active and Active/Passive.

Kaspersky Anti-Virus 6.0 for Windows Servers Enterprise Edition is a «non-cluster-aware» application, i.e. before the installation there is no need to stop the whole cluster. It is recommended to stop the cluster software before the installation; if it is impossible limit the load on the cluster resources.

Kaspersky Anti-Virus 6.0 for Windows Servers Enterprise Edition can be installed on the server cluster running under the following OS’s: 

  • Microsoft Windows 2000 Advanced Server (Service Pack 4 + Update Rollup 1)
  • Microsoft Windows Server 2003 Enterprise Edition (Service Pack 1) and above
  • Microsoft Windows Server 2003 Datacenter Edition (Service Pack 1) and above
  • Microsoft Windows Server 2003 Enterprise Edition R2 (Service Pack 1) and above
  • Microsoft Windows Server 2003 Datacenter Edition R2 (Service Pack 1) and above
  • Microsoft Windows Server 2003 x64 Enterprise Edition (Service Pack 1) and above
  • Microsoft Windows Server 2003 x64 Datacenter Edition (Service Pack 1) and above
  • Microsoft Windows Server 2003 x64 Enterprise Edition R2 (Service Pack 1) and above
  • Microsoft Windows Server 2003 x64 Datacenter Edition R2 (Service Pack 1) and above

Warning Do not install Kaspersky Anti-Virus 6.0 for Windows Servers Enterprise Edition to cluster discs. Otherwise at some period of time only one cluster node will be protected – the one which owns the cluster disc.

INSTALLATION

In series, perform the following steps for each cluster node:

1. Break the cluster by bringing down one of the nodes.

1. 1. Use the application Cluster Administrator, stop Cluster Service on this cluster node.

1. 2. Let «failover» complete.

2. Install the Anti-Virus to the downed node.

Information If Cluster Service has not been installed on this node, clear the box Automatically enable real-time protection in the Setup Wizard of the Anti-Virus. If you run the installation in the silent mode, use the key of the command prompt /RUNRTP=0.

Otherwise after installation of Kaspersky Anti-Virus and start of real-time protection, cluster may freeze, as the anti-virus application will intercept access to quorum resource and to %systemroot%\Cluster.

3. Restart the node:

3. 1. Use the application Cluster Administrator, start Cluster Service on this cluster node

3. 2. Let «failover» complete.

GENERAL RECOMMENDATINS AND PECULIARATIES 

  • To prevent cluster from freezing it is recommended to exclude in the task of Real-time file protection scan of cluster quorum disc (usually marked by the letter Q:) and folders with the Cluster logs C:\Windows\Cluster. It should be done on every cluster node on which Kaspersky Anti-Virus 6.0 for Windows Servers Enterprise Edition is installed.

 

  • Do not use as paths for quarantine and the backup folders which reside on the cluster discs. Otherwise at any moment only one Anti-Virus would have access to the storages - the one which has this cluster disc.

Also do not use network variables which link to the folders on the cluster discs. 

  • When installing remotely via the remote install task in Kaspersky Administration Kit use local names of the servers which is a node-server instead of the shared cluster name. 

 

  • All events and notifications generated by the Anti-Virus on each cluster-node will contain the network node name but not the shared cluster name. 

 

  • Shared cluster discs by default will be protected by the Anti-Virus on the cluster-node which at the moment has the shared cluster discs. When the shared discs migrate on another cluster-node, they are protected by the Anti-Virus that has control of the drives. 

 

  • Do not use as an update source in the update task the folder which are located on the shared cluster discs. Otherwise from this folder on the shared cluster disc only the Anti-Virus which is installed on this cluster node and which has control over the disc can update from this folder. 

 

  • On-demand scan of the shared cluster discs performed by the Anti-Virus will not be automatically started if these shared discs will be migrated onto another cluster node.

 Cette solution a t-elle répondu à votre question?


Si vous voulez participez à notre enquête de satisfaction, cliquez ici.

 

Kaspersky Lab

Copyright © 1997-2014 Kaspersky Lab
Site map  |   Contactez nous  |   Support international  |  Soumettre des fichiers suspects
Accès à votre espace personnel  |   S'enregistrer  |   FAQ sur l'espace personnel
S'identifier sur CompanyAccount  |   S'enregistrer   |   FAQ pour CompanyAccount

Restez connecté