Configuring network settings through the Kaspersky Security Center 13.2 Web Console

The Kaspersky IoT Secure Gateway 1000 system is delivered with a statically configured IP address. To enable the system to operate as a secure gateway for the Internet of Things, you must configure the settings of the external and internal networks. You can also configure the network settings by using the web interface of Kaspersky IoT Secure Gateway 1000.

To configure network settings through the Kaspersky Security Center 13.2 Web Console:

  1. In the main window of the Web Console, select Devices → Managed devices.
  2. Click the name of the device where Kaspersky IoT Secure Gateway 1000 is running. If the device name is not on the list, add it to the Managed devices group.
  3. In the device properties window that opens, select the Applications tab.
  4. Press Kaspersky IoT Secure Gateway.

    This opens a window containing information about Kaspersky IoT Secure Gateway 1000.

  5. Select the Application settings tab.
  6. Select Network → LAN and configure the following settings:
    1. In the IP address field, enter the IP address of the Kaspersky IoT Secure Gateway 1000 device in the internal network.
    2. In the Subnet mask field, enter the subnet mask.
    3. If you need Kaspersky IoT Secure Gateway 1000 to act as a DHCP server, set the toggle button to Use DHCP server and specify the following settings:
      • In the Start of IP address range field, enter the starting IP address of the range.
      • In the End of IP address range field, enter the ending IP address of the range.
      • In the Primary DNS server field, enter the IP address of the primary DNS server.
      • In the Secondary DNS server field, enter the IP address of the secondary DNS server.

      The MAC address field displays the MAC address of the system in the internal network.

  7. Click the Save button.
  8. In the Network section, select the WAN tab and configure the following settings:
    • If you want to configure WAN settings automatically using the DHCP protocol, set the toggle button to DHCP client is enabled.

      If the DHCP server issued null DNS server addresses to Kaspersky IoT Secure Gateway 1000 when enabling automatic configuration of external network settings, the IP address 208.67.222.222 (OpenDNS server) will be used by default to convert a domain name to an IP address.

    • If you want to manually configure the WAN settings, set the toggle button to DHCP client is disabled and do the following:
      • In the IP address field, enter the IP address that you want to assign to the system in the external network.
      • In the Subnet mask field, enter the subnet mask.
      • In the Network gateway field, enter the IP address of the network gateway.
      • In the Primary DNS server field, enter the IP address of the primary DNS server.
      • In the Secondary DNS server field, enter the IP address of the secondary DNS server.

      The MAC address field displays the MAC address of the system in the external network.

  9. Click the Save button.
Page top