Configuring the WAN settings

To configure the WAN settings:

1. In the menu in the left part of the web interface page, select Settings → Network.
2. On the WAN tab, do one of the following:
   • If you need to configure network settings automatically using the DHCP protocol, set the Automatic (via DHCP) toggle button to the enabled position. The Automatic (via DHCP) toggle button is switched on by default.

     If the DHCP server issued null DNS server addresses to Kaspersky IoT Secure Gateway 1000 when enabling automatic configuration of external network settings, the IP address 208.67.222.222 (OpenDNS server) will be used by default to convert a domain name to an IP address.

   • If you need to manually configure the network settings, set the Automatic (via DHCP) toggle button to the disabled position and specify the values for the following settings:
     • IP address.
     • Subnet mask.
     • Gateway.
     • Primary DNS server address.
     • Secondary DNS server address.

     The MAC address field displays the MAC address of the system in the external network.

3. Click Save in the lower part of the page to save the changes.
4. Restart Kaspersky IoT Secure Gateway 1000 to apply the changes to the network settings.

Page top