Configuring Kaspersky IoT Secure Gateway 1000 cellular connection settings through the Kaspersky Security Center 13.2 Web Console

You can view and configure the Kaspersky IoT Secure Gateway 1000 cellular connection settings through the Kaspersky Security Center 13.2 Web Console.

If the device does not have a modem, you cannot use a cellular connection in Kaspersky IoT Secure Gateway 1000 and cannot configure the Kaspersky IoT Secure Gateway 1000 cellular connection settings through the Kaspersky Security Center 13.2 Web Console.

To view the Kaspersky IoT Secure Gateway 1000 cellular connection settings through the Kaspersky Security Center 13.2 Web Console:

1. In the main window of the Web Console, select Devices → Managed devices.
2. Click the name of the device where Kaspersky IoT Secure Gateway 1000 is running. If the device name is not on the list, add it to the Managed devices group.
3. In the device properties window that opens, select the Applications tab.
4. Press Kaspersky IoT Secure Gateway.

   This opens a window containing information about Kaspersky IoT Secure Gateway 1000.

5. Select the Application settings tab.
6. Select Network → Modem.

   A window displaying the following information about the cellular connection of Kaspersky IoT Secure Gateway 1000 will appear:

   • The Modem settings block provides information about the modem operating status and current signal quality.
   • The Modem DNS server addresses block provides information about the IP addresses of the primary and secondary DNS servers of the modem.
   • The Modem profiles table displays information about the available modem profiles.

Kaspersky IoT Secure Gateway 1000 provides for two types of modem profiles:

• Predefined profile – a profile provided together with the device. Predefined profiles are read-only.
• Custom profile – a profile that is created during configuration of the cellular connection. Custom profiles can be edited and deleted.

Different modem profiles enable you to work with different cellular communication providers. To use a cellular connection, one of the modem profiles must be active. The predefined modem profile is active by default.

If there is no cellular connection, you must verify that the following conditions are met:

• The SIM card used in the modem is valid and has an active plan that supports an Internet connection through the modem.
• The selected modem profile matches the utilized SIM card.
• The modem is available for use (a green icon is displayed in the Modem settings block).

  If the modem is not available for use (a gray or red icon is displayed in the Modem settings block), you must restart Kaspersky IoT Secure Gateway 1000 and re-check whether the modem is available for use after the restart. Devices that access the Internet through Kaspersky IoT Secure Gateway 1000 must obtain the internal network settings through the DHCP server of Kaspersky IoT Secure Gateway 1000. The relevant addresses of DNS servers from cellular network providers will be received together with these settings.

In this section Enabling and disabling the Kaspersky IoT Secure Gateway 1000 cellular connection through the Kaspersky Security Center 13.2 Web Console Creating a modem profile for Kaspersky IoT Secure Gateway 1000 through the Kaspersky Security Center 13.2 Web Console Editing the modem profile of Kaspersky IoT Secure Gateway 1000 through the Kaspersky Security Center 13.2 Web Console Deleting the modem profile of Kaspersky IoT Secure Gateway 1000 through the Kaspersky Security Center 13.2 Web Console

Page top