Configuring network settings

Kaspersky IoT Secure Gateway 1000 is delivered with the statically configured IP address 192.168.1.1, which you can change if required. To enable the system to operate as an Internet of Things (IoT) Secure Gateway, configure the settings of the internal and external network.

You can also configure the following network settings for transferring the data:

• Network address translation, or masquerading (enable or disable);
• Modem profile for cellular connection on the device running Kaspersky IoT Secure Gateway 1000 (if the modem is connected to the device);
• Routing for more flexible management of network packets that pass through the device with Kaspersky IoT Secure Gateway 1000;
• An MQTT broker for telemetry data exchange over the MQTT (Message Queuing Telemetry Transport) protocol.

You can view and change the Kaspersky IoT Secure Gateway 1000 network settings in the Network section on the corresponding tabs.

This functionality is available to the administrator only.

In this Help section Configuring the LAN settings Configuring masquerading Configuring the WAN settings Configuring cellular connection settings Configuring routing Configuring MQTT broker settings Filtering application protocol traffic

Page top