Creating an address translation rule through the Web Console

To create a new address translation rule through the Web Console:

  1. In the main window of the Web Console, select Devices → Managed devices.
  2. Click the name of the device running Kaspersky IoT Secure Gateway 1000. If the device name is not on the list, add it to the Managed devices group.
  3. In the device properties window that opens, select the Applications tab.
  4. Press Kaspersky IoT Secure Gateway.

    This opens a window containing information about Kaspersky IoT Secure Gateway 1000.

  5. Select the Application settings tab.
  6. Select Network → NAT.

    This opens a window containing the address translation rules table of Kaspersky IoT Secure Gateway 1000.

  7. Click the Add button in the upper part of the page.
  8. In the Add rule pane that opens on the right, enter the following data:
    • In the Network interface drop-down list, select the interface for which the rule is applied: External network or Modem.
    • In the External port field, enter the transport port number of the external interface for which the rule will be applied.
    • In the Protocol drop-down list, select one of the protocols for which the rule is applied: TCP or UDP.
    • In the IP address field, enter the IP address of the destination node.
    • In the Port field, enter the port of the destination node.
    • In the Comment field, enter a rule description consisting of no more than 255 characters.
  9. Click OK in the lower part of the pane to save your changes.

The new rule will be created and displayed in the address translation rules table.

Page top