Configuring settings of the network interface

If you are using the distributed solution and multitenancy mode, use the web interface of the PCN or SCN server for which you want to configure parameters.

To configure the settings of the network interface:

  1. In the window of the program web interface, select the Settings section, Network settings subsection.
  2. Select the network interface whose settings you want to configure.

    This opens the Edit network interface window.

  3. In the Mode line, select one of the following options:
    • If you want the IP address of the network interface to be assigned using a DHCP server, select DHCP.
    • If you want to assign a static IP address to the network interface, select Static.
  4. If you selected Static:
    1. In the IP field, specify the IP address of the network interface.
    2. In the Subnet mask field, specify the subnet mask of the network interface.
  5. If you want to enable a network interface, in the State line, set the toggle switch to Enabled.
  6. Click the Initialize button.

The settings of the network interface will be configured.

Page top