Filtering and searching Endpoint Sensors by computer IP address

To filter or search for hosts with the Endpoint Sensors component based on the IP address of the computer with the Endpoint Sensors component installed:

  1. Select the Endpoint Sensors section in the window of the program web interface.

    This will open the table of hosts with the Endpoint Sensors component.

  2. If distributed solution and multitenancy mode is disabled, select one of the following subsections:
    • Central Node.
    • KSC.
  3. Click the IP link to open the filter configuration window.
  4. In the drop-down list, select one of the following filtering operators:
    • Contains.
    • Does not contain.
  5. In the entry field, specify one or several characters of the computer IP address. You can enter the IP address or subnet mask in IPv4 format (for example, 192.0.0.1 or 192.0.0.0/16).
  6. To add a filter condition using a different criterion, click Apt_icon_alerts_add_filter and specify the filter condition.
  7. If you want to delete the filter condition, click the kata_icon_delete_ep button to the right of the field.
  8. Click the Apply button.

The filter configuration window closes.

The table of hosts with the Endpoint Sensors component displays only hosts that match the conditions that you specified.

You can use multiple filters at the same time.

See also

Managing the Endpoint Sensors component

Viewing the Endpoint Sensors table on a standalone Central Node server

Viewing the Endpoint Sensors table on a standalone Central Node server with KSC integration

Viewing the Endpoint Sensors table in distributed solution and multitenancy mode

Viewing information about a host

Filtering and searching Endpoint Sensors by host name

Filtering and searching Endpoint Sensors that have been isolated from the network

Filtering and searching Endpoint Sensors by PCN and SCN server names

Filtering and searching Endpoint Sensors by operating system version on the computer

Filtering and searching Endpoint Sensors based on the Endpoint Sensor component version

Filtering and searching Endpoint Sensors based on their activity

Filtering and searching Endpoint Sensors by operating errors of the component

Quickly creating a filter for computers with the Endpoint Sensors component

Clearing the Endpoint Sensors filter

Configuring Endpoint Sensors activity indicators

Supported interpreters and processes

Page top