Step 14. Configuring integration with the Sandbox component

To connect to the server on which you installed the Sandbox component:

1. In the Sandbox access window, compare the IP address and certificate fingerprint with the IP address and certificate fingerprint on the server hosting the Sandbox component.
2. Select New.
3. Press ENTER.
4. This opens the Sandbox Node window.
5. In the Sandbox name field, enter the name of the server with the Sandbox component to be displayed on servers hosting the Central Node component.
6. In the Sandbox node field, enter the IP address or URL of the server with the Sandbox component.
7. Click Ok.

   This opens the Sandbox Access window.

8. Check the settings for connecting to the Sandbox server.
9. If you want to enable or disable the use of the server with the Sandbox component, click the line containing the name and address of this server.

   If you configured a connection to the server with the Sandbox component, its use is enabled by default.

10. Select Continue.
11. Press ENTER.

The Setup Wizard proceeds to the next step.

You can accept, reject or revoke a previously accepted connection request from the Central Node servers in the Sandbox web interface.

To accept, reject or revoke a connection request from the Central Node servers, proceed as follows:

1. Select the Authorization section in the window of the Sandbox web interface.

   The Central Node connection requests section will show a list of connection requests from the Central Node components.

   Each connection request contains the following information:

   • IP—IP address of the Central Node server.
   • Certificate fingerprint—Thumbprint of the Central Node TLS certificate used to establish an encrypted connection between servers.
   • State—Status of the connection request.

     May have the values Pending or Accepted.

2. Make sure that the Central Node certificate thumbprint matches the certificate thumbprint configured for the Central Node.

   You can check the Central Node certificate thumbprint from the Central Node server administrator menu in the Manage Server Certificate section.

3. Click one of the following buttons in the line containing the connection request from the Central Node component:
   • Accept if you want to accept the connection request.
   • Reject if you want to reject the connection request.
   • Revoke if you want to revoke a previously accepted connection request.
4. Click Apply in the lower part of the window.

See also Installing and configuring the Central Node and Sensor components on the same server Step 1. Viewing the End User License Agreement and Privacy Policy Step 2. Selecting a disk for installing the Central Node and Sensor components Step 3. Selecting a server role Step 4. Configuring the minimum password length for the administrator password Step 5. Creating an account for working in the administrator menu and in the server management console Step 6. Assigning the host name Step 7. Enabling a network interface for the first time Step 8. Assigning the address and subnet mask of the management interface Step 9. Configuring the default network route Step 10. Configuring DNS settings Step 11. Configuring proxy server connection settings Step 12. Setting the time zone Step 13. Configuring time synchronization with an NTP server Step 15. Allocating the disk for the Targeted Attack Analyzer component's database Step 16. Creating an administrator account for the web interface of Kaspersky Anti Targeted Attack Platform Step 17. Configuring receipt of mirrored traffic from SPAN ports Step 18. Configuring integration with a proxy server via ICAP Step 19. Configuring integration with a mail server via POP3 Step 20. Configuring integration with a mail server via SMTP

Page top