Step 10. Configuring DNS settings

During this step, configure the DNS settings for the operation of servers with program components.

To configure static DNS addresses:

  1. In the Select action - Resolver window, select any setting (for example, Search list) and press ENTER.

    This opens the window for entering static DNS addresses.

  2. In the Search list field, enter the DNS suffix that you want to use in Kaspersky Anti Targeted Attack Platform. For example: example.com.
  3. In the Primary field, enter the IP address of the primary DNS server in IPv4 format.
  4. In the Secondary field, enter the IP address of the secondary DNS server in IPv4 format.
  5. Click Ok.

    This will open the DNS settings configuration window displaying the assigned static DNS settings.

  6. Verify that the DNS settings are correct.
  7. Select Continue and press ENTER.

The Setup Wizard proceeds to the next step.

See also

Installing and configuring the Sensor component on a separate server

Step 1. Viewing the End User License Agreement and Privacy Policy

Step 2. Selecting a disk for installing the Sensor component

Step 3. Selecting a server role

Step 4. Configuring the minimum password length for the administrator password

Step 5. Creating an account for working in the administrator menu and in the server management console

Step 6. Assigning the host name

Step 7. Enabling a network interface for the first time

Step 8. Assigning the address and subnet mask of the management interface

Step 9. Configuring the default network route

Step 11. Configuring proxy server connection settings

Step 12. Setting the time zone

Step 13. Configuring time synchronization with an NTP server

Step 14. Connecting to the server with the Central Node component

Step 15. Selecting the Central Node server as the source of Sensor component database updates

Step 16. Configuring receipt of mirrored traffic from SPAN ports

Step 17. Configuring integration with a proxy server via ICAP

Step 18. Configuring integration with a mail server via POP3

Step 19. Configuring integration with a mail server via SMTP

Page top