Configuring the maximum allowable CPU and RAM load of the Central Node and Sensor servers

In the distributed solution and multitenancy mode, you need to set the maximum allowed load values for the CPU and RAM load of each Central Node server from which you want to receive notifications. If you use a Central Node cluster, you can configure these settings on any cluster server.

To configure the maximum allowed load on the CPU and RAM of the Central Node and Sensor servers:

1. In the window of the program web interface, select the Settings section, General settings subsection.
2. Under Monitoring:
   • In the Warning of CPU usage above N % for M minutes field, enter the maximum allowed CPU usage and time period for which the maximum load can be maintained.

     By default, the maximum CPU load is 95% for 5 minutes.

   • In the Warning of RAM usage above N % for M minutes field, enter the maximum allowed RAM usage and time period for which the maximum usage can be maintained.

     By default, the maximum RAM usage is 95% for 5 minutes.

3. Click Apply.

The maximum allowed load of server CPU and RAM will be configured. If one of the values is exceeded on the Central Node and/or Sensor server, in the upper part of the Dashboard section of the program web interface for users with Senior security officer, Security officer, Administrator, or Local administrator role, a yellow warning box is displayed.

Page top