Enabling and configuring exclusions for sent EDR telemetry about network communications

You can configure exclusions for EDR telemetry using Kaspersky Security Center Administration Console, in the properties of an individual device or in the policy settings for a group of devices.

Exceptions for sent EDR telemetry about network communications are applicable when integrating Kaspersky Endpoint Agent with servers on which Kaspersky Industrial CyberSecurity for Networks is installed.

Kaspersky Endpoint Agent does not analyze or send data matching exclusion settings to a server with Kaspersky Industrial CyberSecurity for Networks installed.

To enable and configure EDR telemetry about network communications:

1. Do one of the following:
   • Open the application properties window for an individual device.
     1. In the Managed devices folder of the Administration Console tree, select the folder with the name of the administration group, which includes the required device.
     2. In the workspace, select the Devices tab.
     3. Select the device for which you want to configure Kaspersky Endpoint Agent settings.
     4. Select Properties in the device context menu.

        The device properties window opens.

     5. Select the Applications section.

        A list of Kaspersky applications installed on the device is displayed in the window.

     6. Select Kaspersky Endpoint Agent and open its properties window in one of the following ways:
        • Double-click the application name.
        • In the application context menu, select Properties.
        • Click the Properties button under the list of Kaspersky applications.

   • Open the policy properties window.
     1. Open Kaspersky Security Center Administration Console.
     2. In the console tree, open the Policies folder.
     3. Select Kaspersky Endpoint Agent policy and open its properties window in one of the following ways:
        • Double-click the policy name.
        • Select Properties in the policy context menu.
        • Select the Configure policy settings item in the right part of the window.

2. Select the EDR telemetry → Excluded network communications section.
3. In the Exclusions settings group, enable the Use exclusions setting to enable use of EDR telemetry exclusions.
4. Create a list of exclusions:
   1. Click the Add button.
   2. In the Rule properties window that opens, configure the exclusion settings.

      Exclusion settings are applied using a logical AND.

      1. In the Name field, enter the name of the exclusion.
      2. In the Direction drop-down list, select the direction of network traffic.
      3. In the Protocol drop-down list, select the network protocol.
      4. If you select a custom protocol, in the Number field, enter the network protocol number.
      5. Select the Local port OR range check box and enter the port number or number range.

         For incoming connections (in the Direction drop-down list, Incoming is selected), enter the port or range of ports for the local device.

         For outgoing connections (in the Direction drop-down list, Outgoing is selected), enter the port or range of ports for the remote device.

         The values 1–65535 are available for port numbers.

         The values 1–10, 20–30000 and 1–65535 are available for a range of ports.

         Limitations:

         • For network connections of a local device running the Windows XP operating system, you can specify only a single port, because Windows XP does not support a range of ports.
         • For network connections of a remote device running the Windows XP operating system, you can specify a range of ports, but only the first port in the specified range is correctly applied, because Windows XP does not support a range of ports.
      6. Select the Remote port OR range check box and enter the port number or number range.

         For incoming connections (in the Direction drop-down list, Incoming is selected), enter the port or range of ports for the remote device.

         For outgoing connections (in the Direction drop-down list, Outgoing is selected), enter the port or range of ports for the local device.

         The values 1–65535 are available for port numbers.

         The values 1–10, 20–30000 and 1–65535 are available for a range of ports.

         Limitations:

         • For network connections of a local device running the Windows XP operating system, you can specify only a single port, because Windows XP does not support a range of ports.
         • For network connections of a remote device running the Windows XP operating system, you can specify a range of ports, but only the first port in the specified range is correctly applied, because Windows XP does not support a range of ports.
      7. Select the Local address check box and enter the network address of the device for which Kaspersky Endpoint Agent will not analyze or send EDR telemetry about network traffic in accordance with the exclusion settings.

         For incoming exclusions (in the Direction drop-down list, Incoming is selected), enter the network address for the local device.

         For outgoing connections (in the Direction drop-down list, Outgoing is selected), enter the network address of the remote device.

         For IP addresses, only addresses in IPv4 format are supported.

      8. Select the Remote address check box and enter the network address of the device for which Kaspersky Endpoint Agent will not analyze or send EDR telemetry about network traffic in accordance with the exclusion settings.

         For incoming connections (in the Direction drop-down list, Incoming is selected), enter the network address for the remote device.

         For outgoing connections (in the Direction drop-down list, Outgoing is selected), enter the network address for the local device.

         For IP addresses, only addresses in IPv4 format are supported.

      9. Create the list of application for which Kaspersky Endpoint Agent will not analyze or send EDR telemetry about network traffic in accordance with the exclusion settings.
         1. Select the Applications check box.
         2. In the field below, specify the path to the executable file of the application you want to add to the list. You can enter the path manually or with the help of the Browse button.
         3. Click the Add button.
         4. For each application you want to add to the list, repeat steps 2 and 3 of the guide.
         5. If necessary, remove an application from the list:
            1. Select the application in the list.
            2. Click the Delete button.
      10. Click OK to save the changes and close the Rule properties window.

          The new exclusion is created and displayed in the list of exclusions.

   3. If you need to modify an exclusion, click the Modify button.
   4. If you need to delete an exclusion, select the exclusion and click the Delete button.
5. If you are configuring the policy settings, make sure that the switch in the upper right corner of the group of settings is turned on. It is the default position of the switch.
6. Click OK to save the changes.

Page top