In this window, you can specify or change the settings for connecting Light Agents to the Integration Server.
Settings for connecting to the Integration Server
Setting |
Description |
---|---|
Address |
IP address in IPv4 format or fully qualified domain name (FQDN) of the device on which the Integration Server is installed. If a NetBIOS name, "localhost", or 127.0.0.1 is specified as the address, the connection to the Integration Server fails with an error. |
Port |
Port for connecting to the Integration Server. Port 7271 is used by default. |
Check |
When you click the button, the web plug-in checks the SSL certificate received from the Integration Server. The button is available after entering the address and port for connecting to the Integration Server. If the certificate contains an error or is not trusted, a corresponding message is displayed in the Connection to the Integration Server window. |
View the received certificate |
Click the line to view information about the certificate received from the Integration Server. |
Ignore |
Select this option to save the received certificate and continue connecting to the Integration Server. If you encounter problems with an SSL certificate, we recommend to make sure that the data transmission channel you are using is secure. |
Cancel |
Select this option to terminate the connection to the Integration Server. |
Password |
Password for the Integration Server administrator account (admin account password). It is recommended to make sure that the password complexity and anti-bruteforce mechanisms ensure that the password cannot be guessed within 6 months. |
Check |
Clicking the button connects the web plug-in to the Integration Server. After connecting to the Integration Server with administrator rights, the policy automatically receives the password of the agent account, which is used to connect Light Agents to the Integration Server. The password is stored in encrypted form. |