Configuring connection settings in Web Plug-in

The configured connection settings are used to connect Kaspersky Embedded Systems Security for Windows to update and activation servers and during integration of applications with KSN services.

To configure the connection settings take the following steps:

  1. In the main window of the Kaspersky Security Center Web Console, select Devices → Policies & profiles.
  2. Click the policy name you want to configure.
  3. In the <Policy name> window that opens, select the Application settings tab.
  4. Select the Application settings section.
  5. Click the Settings button in the Scalability, interface and scan settings subsection.
  6. Configure the settings described in the table below.

    Connection settings

    Setting

    Description

    Do not use proxy server

    If this option is selected, Kaspersky Embedded Systems Security for Windows connects to KSN services directly, without using any proxy server.

    Use specified proxy server settings

    If this option is selected, Kaspersky Embedded Systems Security for Windows connects to KSN using proxy server settings specified manually.

    Do not use proxy server for local addresses

    This check box enables or disables the use of a proxy server when accessing devices located in the same network as the protected device with Kaspersky Embedded Systems Security for Windows installed.

    If this check box is selected, devices are accessed directly from the network that hosts the protected device with Kaspersky Embedded Systems Security for Windows installed. No proxy server is used.

    If the check box is cleared, a proxy server is used to connect to local devices.

    The check box is selected by default.

    Proxy server authentication settings

    Specify the authentication settings

    Do not use authentication

    Authentication is not performed. The mode is selected by default.

    Use NTLM authentication

    Authentication is performed using the NTLM network authentication protocol developed by Microsoft.

    Use NTLM authentication with user name and password

    Authentication is performed with a user name and password using the NTLM network authentication protocol developed by Microsoft.

    Apply user name and password

    Authentication is performed using the user name and password.

Page top