UseClientPinnedCertificate

Enabling or disabling two-way authentication for additional protection of the connection to the Kaspersky Industrial CyberSecurity for Networks Integration Server.

If client certificate validation is enabled on the integration server side, enable the use of a client certificate and add a client certificate before starting the Integration with Kaspersky Industrial CyberSecurity for Networks task.

Yes – use two-way authentication for additional protection of the connection to the Kaspersky Industrial CyberSecurity for Networks Integration Server.

No (default value) — do not use two-way authentication.

SynchronizationPeriod

Frequency of sending synchronization requests to the Integration Server in minutes.

The default value is 5.

ConnectionTimeout

Maximum time to wait for a connection to the Integration Server in seconds.

The default value is 10.

RequestTimeout

Maximum time to wait for a response from the integration server in seconds.

The default value is 10.

EnableTelemetry

Enable and disable sending event data (telemetry) to the Integration Server.

Yes (default value) – send telemetry to the Integration Server.

No – disable telemetry.

The [Endpoints.item_#] section contains the settings of the Kaspersky Industrial CyberSecurity for Networks integration server.

Address

Kaspersky Industrial CyberSecurity for Networks integration server address.

IP address (IPv4 or IPv6) or fully qualified domain name (FQDN) of the integration server can be specified.

Default value: 127.0.0.1.

Port

Port for connecting to the Integration Server.

The default value is 8081.

The [EventTransferSettings] section contains settings for sending events to the Kaspersky Industrial CyberSecurity for Networks Integration Server.

MaximumDataTransferTime

The maximum delay for sending events to the Integration Server, in seconds.

The default value is 30.

MaximumNumberOfEventsInPackage

Maximum number of events in one packet.

The default value is 1024.

UseRequestCountLimits

Enable and disable throttling the number of events sent to the Integration Server.

Yes (default value) – regulate the number of events sent.

No – do not regulate the number of events.

MaximumNumberOfEventsInHour

Maximum number of events per hour

The default value is 3000.

EventLimitExceededPercentage

Event throttle threshold (percentage). Sending events is limited if the ratio of events of a certain type to the total number of events exceeds the configured threshold (as a percentage).

The default value is 15.

PingPeriod

Frequency in seconds at which Integration Servers are polled.

The default value is 450.