Hardware and software requirements

Before installing Kaspersky Industrial CyberSecurity for Nodes, you must uninstall other anti-virus applications from the device to avoid possible conflicts between the applications.

Hardware requirements for the protected device

General requirement: x86/64-compatible single-core or multi-core systems.

Disk space requirements:

For installing all application components: 100 MB
For downloading and storing anti-virus databases: 2 GB or more
For storing objects in Quarantine and in Backup: 400 MB or more
For storing logs: 1 GB or more

Minimum configuration:

Processor: 1.4 GHz single-core. For 64-bit Microsoft Windows operating systems – Intel® Pentium® IV.
RAM:
- 512 MB for a protected devices under operating systems:
  - Windows Server 2003 x86/x64
  - Windows Server 2008 x86
  - Windows 7 x86
  - Windows 8 x86
  - Windows XP x86/x64
  - Windows XP Embedded
  - Windows Embedded POSReady 2009
  - Windows Embedded POSReady 7
- 1 GB for a protected device under operating systems:
  - Windows Server 2008 x64
  - Windows Server 2012 x64
  - Windows Server 2016 x64
  - Windows Server 2019 x64
  - Windows 7 x64
  - Windows 8 x64
  - Windows 10 x64
  - Windows Embedded 7
  - Windows Embedded 8
This space is used for storing Kaspersky CyberSecurity for Nodes components only. In case of Kaspersky Endpoint Agent installation on the same device, additional space is required:
- RAM: 50 MB
- Disk: 250 MB
Disk:
- 2 GB of free space for a protected devices under operating systems:
  - Windows 7 x86/x64
  - Windows 8 x86/x64
  - Windows XP x86/x64
  - Windows Embedded XP
  - Windows 10 x64
  - Windows Embedded POSReady 2009
  - Windows Embedded POSReady 7
  - Windows Embedded 7
  - Windows Embedded 8
- 4 GB of free space for a protected devices under operating systems:
  - Windows Server 2003 x86/x64
  - Windows Server 2008 x86
  - Windows Server 2008 x64
  - Windows Server 2012 x64
  - Windows Server 2016 x64
  - Windows Server 2019 x64
  4 GB, which will be used as follows:
  - 100 MB are required for installation of all application components.
  - 400 MB are required for storing objects in Quarantine and Backup storages.
  - 1 GB are required for storing logs.
  - 2 GB are required for storing Anti-virus databases.

Recommended configuration:

Processor: 2.4 GHz quad-core
RAM: 2 GB
Disk: 4 GB of free space

Software requirements for the protected device

Desktop operating systems:

Windows XP Professional SP2 and later x86
Windows Vista® SP 2 x86/x64
Windows 7 Family:
- Windows 7Professional / Enterprise / Ultimate x86/x64
- Windows 7 Professional / Enterprise / Ultimate SP1 and later x86/x64
Windows 8 Family:
- Windows 8 Pro x86/x64
- Windows 8 Enterprise x86/x64
Windows 8.1 Pro / Enterprise x86/x64
Windows 10 Family:
- Windows 10 Pro x86/x64
- Windows 10 Enterprise LTSC 2015 / 2016 / 2019 x86/x64
- Windows 10 1507/19H1/20H1/20H1/21H1
- Windows 10 1607/1703/1709/1803/1809

Server operating systems:

Windows Server 2003 Standard / Enterprise SP2 and later x86/x64
Windows Server 2008 Standard / Enterprise SP2 and later
Windows Server 2008 R2 Standard / Enterprise SP1 and later
Windows 2012 Family:
- Windows Server 2012 Essentials / Standard / Foundation / Datacenter x64
- Windows Server 2012 R2 Essentials / Standard / Foundation / Datacenter x64
Windows Server 2016
Windows Server 2019

Embedded systems:

Windows XP Embedded x86 (POS Ready)
Windows Embedded Standard 7 x86/x64
Windows Embedded 8.1 Industry Pro x86/x64
Windows Embedded 8.0 Standard x86/x64
Windows 10 Family:
- Windows 10 IoT Enterprise 19H1/20H1/20H1/21H1
- Windows 10 IoT Enterprise1607/1703/1709/1803/1809
- Windows 10 IoT Enterprise 1507 (10240.18818) x86/x64

You can upgrade Kaspersky Industrial CyberSecurity for Nodes from versions 2.6 to version 3.0. In this case the application applies the rule list set in the previous versionsalong with the new rule list.

If you want to upgrade Kaspersky Industrial CyberSecurity for Nodes from vsions alier than 2.6, you need to completely uninstall the application and then install Kaspersky Industrial CyberSecurity for Nodes 3.0. In this case the local rule lists set for the previous version will be removed, but rule lists controlled by Kaspersky Security Center policies will still be applied.

Supported industrial systems

Kaspersky Industrial CyberSecurity for Nodes 3.0 protects the following programmable logic controllers:

SIMATIC™ series S7-300 (Siemens™)
SIMATIC series S7-400 (Siemens)
SIMATIC series S7-400H in the redundant mode (Siemens)
Schneider Electric Modicon M340
Schneider Electric Modicon M580

Limiting functional on later Windows versions

Windows XP SP2 version do not allow to block remote devices and configure the List of blocked network sessions settings. In this Windows version, the Block access to network shared resources for the sessions that show malicious activity option is inactive.

Hardware and software requirements for Kaspersky Security Gateway

General hardware and software requirements:

1 GB of free disk space.
The Kaspersky Security Center Administration Server must be installed if the klakaut service is selected as a data provider.

Desktop operating systems:

Windows Vista with SP 2 x86/x64
Windows 7 Professional x86/x64
Windows 7 Enterprise/Ultimate x86/x64
Windows 7 Professional with SP1 and higher x86/x64
Windows 7 Enterprise/Ultimate with SP1 and higher x86/x64
Windows 8 Pro x86/x64
Windows 8 Enterprise x86/x64
Windows 8.1 Pro x86/x64
Windows 8.1 Enterprise x86/x64
Windows 10 Pro x86/x64
Windows 10 Enterprise x86/x64
Windows 10 RS1/RS2/RS3/RS4

Server operating systems:

Windows Server 2008 Standard with SP1 and higher
Windows Server 2008 Enterprise with SP1 and higher
Windows Server 2008 R2 Standard
Windows Server 2008 R2 Enterprise
Windows Server 2008 R2 Standard with SP1
Windows Server 2008 R2 Enterprise with SP1
Windows Server 2012 Essentials/ Standard/ Foundation/ Datacenter x64
Windows Server 2012 R2 Essentials/ Standard/ Foundation/ Datacenter x64
Windows Server 2016

Page top