Configuring PLC Project Integrity Check

To configure PLC Project Integrity Check, do the following:

1. Open the Kaspersky Security Center Administration Console.
2. In the Managed devices node, select the Devices tab and open the selected computer's properties.
3. In the Tasks section, select PLC Project Integrity Check > Properties.

   The Properties: PLC Project Integrity Check window opens.

4. In the Settings section of the PLC Project Integrity Check task's properties window, click Add.

   The PLC Project Integrity Check information window opens. All data in this window is received as a result of running the PLC Project Investigation local task via Kaspersky Security Center.

5. For each type of PLC in the table, configure the PLC Integrity Check settings, if necessary. To do this, perform the following actions:
   1. In the table, select the entry with the PLC's information and click Edit.

      The PLC project integrity check settings window opens.

   2. Set the value in the PLC polling interval field in order to indicate the time interval at which the application will request information about the PLC's project settings.
   3. Select the PLC reference project in the list. Based on the results of a comparison with the reference project's settings, the application makes a conclusion regarding the integrity of the PLC's project.
   4. Click OK in the PLC project integrity check settings window.
6. In the PLC type column of the PLC Project Integrity Check information window, select the check boxes next to the types of PLCs whose project integrity you want to check.
7. In the PLC Project Integrity Check information window, click OK.
8. In the Properties: PLC Project Integrity Check window, click OK to save your changes.

Page top