4000005003

Detected new device with the address $owner_ip_or_mac

Critical

Asset Management monitoring mode resulted in the automatic addition of a new device based on a detected IP address or MAC address that has not been specified for other devices in the table.

The following variables are used in the title and description of an event type:

• $owner_ip_or_mac – IP or MAC address of the device.
• $asset_name – assigned name of the device.
• $assigned_mac – assigned MAC address (if defined).
• $owner_ip – assigned IP address (if defined).
• $asset_id – ID of the device.

4000005004

Received new information about device with the address $owner_ip_or_mac

Informational

Asset Management monitoring mode resulted in the automatic update of device information based on data obtained from traffic.

The following variables are used in the title and description of an event type:

• $owner_ip_or_mac – IP or MAC address of the device.
• $asset_name – name of the device.
• $updated_params – list of updated information.
• $asset_id – ID of the device.

4000005005

IP address $owner_ip conflict detected

Critical

In Asset Management monitoring mode, the application detected the use of an IP address by a different device than the device for which this IP address was specified.

The following variables are used in the title and description of an event type:

• $owner_ip – IP address.
• $challenger_asset_name – name of the device that used the IP address.
• $challenger_mac – MAC address of the device that used the IP address.
• $asset_name – name of the device in whose settings the IP address was specified.
• $owner_mac – MAC address of the device in whose settings the IP address was specified.
• $challenger_ips_list – list of other IP addresses of the device that used the IP address.
• $asset_id – ID of the device in whose settings the IP address was specified.
• $challenger_id. – ID of the device that used the IP address.

4000005006

Detected traffic from address $owner_ip_or_mac, which is assigned to a device with the Archived status

Critical

In Asset Management monitoring mode, activity was detected from a device that was assigned the Archived status.

The following variables are used in the title and description of an event type:

• $owner_ip_or_mac – IP or MAC address of the device.
• $asset_name – name of the device.
• $last_seen_timestamp – date and time when the device was last seen in the network.
• $asset_id – ID of the device.

4000005007

A new IP address $new_ip_addr was detected for the device with MAC address $owner_mac

Critical

In Asset Management monitoring mode, a new IP address used by a device was detected.

The following variables are used in the title and description of an event type:

• $new_ip_addr – detected IP address.
• $owner_mac – MAC address of the device.
• $asset_name – name of the device.
• $owner_ips_list – list of other IP addresses of the device.
• $asset_id – ID of the device.

4000005008

MAC address $owner_mac was added to the device with IP address $owner_ip

Informational

Asset Management monitoring mode resulted in the automatic addition of a MAC address for a network interface for which only an IP address was specified (the device had the Unauthorized or Archived status).

The following variables are used in the title and description of an event type:

• $owner_mac – detected MAC address of the device.
• $owner_ip – IP address of the device.
• $asset_name – name of the device.
• $asset_id – ID of the device.

4000005009

IP address $owner_ip was added to the device with MAC address $owner_mac

Informational

Asset Management monitoring mode resulted in the automatic addition of an IP address for a network interface for which only a MAC address was specified (the device had the Unauthorized or Archived status).

The following variables are used in the title and description of an event type:

• $owner_ip – detected IP address of the device.
• $owner_mac – MAC address of the device.
• $asset_name – name of the device.
• $asset_id – ID of the device.

4000005010

Detected new MAC address $new_mac_addr for device with the IP address $owner_ip

Critical

Asset Management monitoring mode resulted in the detection of a new MAC address used by a device (autoupdate of address information is disabled for the device).

The following variables are used in the title and description of an event type:

• $new_mac_addr – detected MAC address.
• $owner_ip – IP address of the device.
• $asset_name – name of the device.
• $asset_id – ID of the device.

4000005200

PLC Project Control: detected read of unknown block from PLC $asset_name

Critical

PLC Project Control read/write monitoring resulted in a detected read of an unknown block of a project from a PLC (if there is no saved information about this block).

The following variables are used in the title and description of an event type:

• $asset_name – name of the device.
• $block_name – name of the block.
• $saved_date_time – date and time when the operation was detected.

4000005201

PLC Project Control: detected read of known block from PLC $asset_name

Critical

PLC Project Control read/write monitoring resulted in a detected read of a known block of a project from a PLC (if there is saved information about this block but the received information does not match the latest saved information about this block).

The following variables are used in the title and description of an event type:

• $asset_name – name of the device.
• $block_name – name of the block.
• $saved_date_time – date and time when the block was saved in the application.

4000005202

PLC Project Control: detected write of new block to PLC $asset_name

Critical

PLC Project Control read/write monitoring resulted in a detected write of an unknown block of a project from a PLC (if there is no saved information about this block).

The following variables are used in the title and description of an event type:

• $asset_name – name of the device.
• $block_name – name of the block.
• $saved_date_time – date and time when the operation was detected.

4000005203

PLC Project Control: detected write of known block to PLC $asset_name

Critical

PLC Project Control read/write monitoring resulted in a detected write of a known block of a project from a PLC (if there is saved information about this block but the received information does not match the latest saved information about this block).

The following variables are used in the title and description of an event type:

• $asset_name – name of the device.
• $block_name – name of the block.
• $saved_date_time – date and time when the block was saved in the application.

4000005204

PLC Project Control: detected read of unknown project from PLC $asset_name

Critical

PLC Project Control read/write monitoring resulted in a detected read of an unknown project from a PLC (if there is no saved information about this project).

The following variables are used in the title and description of an event type:

• $asset_name – name of the device.
• $saved_date_time – date and time when the operation was detected.

4000005205

PLC Project Control: detected read of known project from PLC $asset_name

Critical

PLC Project Control read/write monitoring resulted in a detected read of a known project from a PLC (if there is saved information about this project but the received information does not match the latest saved information about this project).

The following variables are used in the title and description of an event type:

• $asset_name – name of the device.
• $saved_date_time – date and time when the project was saved in the application.

4000005206

PLC Project Control: detected write of new project to PLC $asset_name

Critical

PLC Project Control read/write monitoring resulted in a detected write of a new project to a PLC (if there is no saved information about this project).

The following variables are used in the title and description of an event type:

• $asset_name – name of the device.
• $saved_date_time – date and time when the operation was detected.

4000005207

PLC Project Control: detected write of known project to PLC $asset_name

Critical

PLC Project Control read/write monitoring resulted in a detected write of a known project to a PLC (if there is saved information about this project but the received information does not match the latest saved information about this project).

The following variables are used in the title and description of an event type:

• $asset_name – name of the device.
• $saved_date_time – date and time when the project was saved in the application.

4000000004

Test event (AM)

Informational

A test network packet was detected (with the device activity detection method enabled).