Viewing the connectors table

Expand all | Collapse all

When viewing the connectors table, you can utilize the following functions:

• Configure the layout and order of columns displayed in the connectors table.

  To configure the list of columns displayed in the table:

  1. Under Settings → Connectors, click the Customize table link to open the window for configuring how the table is displayed.
  2. Select the check boxes opposite the settings that you want to view in the table. You must select at least one setting.

     The following settings are available for selection:

     • Name.

       Defined name of the connector.

     • Connector ID.

       ID assigned to the connector when it was created.

     • Enabled.

       Indicates whether the connector is enabled or disabled. If a connector is disabled, a connection through this connector is not possible.

     • State.

       Indicates the connector's registration state on the Server. The following states are available:

       • Awaiting registration – no connection has been established through this connector since the communication data package was created for the connector.
       • Registered – a successful connection was established through this connector after the communication data package was created for the connector.

       If a connector is disabled, the Disabled state is displayed for it regardless of the current registration state of this connector.

     • Type.

       Connector type.

     • Last connection.

       Date and time of the last connection through this connector.

     • Changed.

       Date and time of the last modification of the connector settings.

     • Description

       Defined description of the connector.

     • Event types.

       Information about event types forwarded through the connector:

       • All – all event types are selected for forwarding through the connector.
       • Selected – not all event types are selected for forwarding through the connector.
       • None sent – there are no event types selected for forwarding through the connector.
     • Application messages.

       Information about application messages forwarded through the connector:

       • All – all application messages are forwarded through the connector.
       • None sent – application messages are not forwarded through the connector.
     • Audit entries.

       Information about audit entries forwarded through the connector:

       • All – all audit entries are forwarded through the connector.
       • None sent – audit entries are not forwarded through the connector.
  3. If you want to change the order in which columns are displayed, select the name of the column that needs to be moved to the left or right in the table and use the buttons containing an image of the up or down arrows.

  The selected columns will be displayed in the connectors table in the order you specified.

• Filtering based on table columns

  To filter connectors by the Name or Connector ID column:

  1. Under Settings → Connectors, click the filtering icon in the relevant column of the table.

     The filtering window opens.

  2. In the Including and Excluding fields, enter the values that you want to include into the filter and/or exclude from the filter.
  3. If you want to apply multiple filter conditions combined by the logical operator OR, in the filter window of the column click the Add condition button and enter the condition in the opened field.
  4. If you want to delete one of the created filter conditions, in the filter window of the column click the icon.
  5. Click OK.

  To filter connectors by the Enabled, State, Type, Event types, Application messages or Audit entries column:

  1. Under Settings → Connectors, click the filtering icon in the relevant column of the table.

     When filtering based on the states or types of connectors, you can also use the corresponding buttons in the toolbar.

     The filtering window opens.

  2. Select the check boxes opposite the values by which you want to filter events. You can clear or remove all check boxes by clicking the link that is displayed in the upper part of the filter window.
  3. Click OK.
• Search connectors

  To find the relevant connectors:

  Under Settings → Connectors, enter your search query into the Search connectors field. The search is initiated as you enter characters.

  The table will display the connectors that meet the search criteria.

  The search is performed in the Name, Description and Type columns.

• Resetting the defined filter and search settings

  To reset the defined filter and search settings in the connectors table:

  Under Settings → Connectors, click the Default filter button in the toolbar (this button is displayed if the filter and/or search settings are defined).

• Sorting connectors

  To sort connectors:

  1. Under Settings → Connectors, click the header of the column by which you want to sort.
  2. If you need to sort the table based on multiple columns, press the SHIFT key and hold it down while clicking the headers of the columns by which you want to sort.

  The table will be sorted by the selected column. When sorting by multiple columns, the rows of the table are sorted according to the sequence of column selection. Next to the headers of columns used for sorting, you will see icons displaying the current sorting order: in ascending order or descending order of values.

Page top