Selecting the applied methods and changing the Asset Management mode

Only users with the Administrator role can manage asset management methods and modes.

To enable or disable the use of asset management methods:

1. Connect to the Kaspersky Industrial CyberSecurity for Networks Server through the web interface using the Administrator account.
2. Select Settings → Technologies.
3. Enable or disable the use of asset management methods by using the following toggle buttons:
   • Device Activity Detection
   • Device Information Detection
   • PLC Project Control
   • Risk Detection
4. After a method is enabled or disabled, wait for the toggle switch to change to the necessary position (Enabled or Disabled).

   The process may take some time, during which the toggle switch will be unavailable. Wait for the method to be enabled or disabled.

5. If the Device Activity Detection method is enabled, select the necessary asset management mode to be applied with the method. To do so, in the drop-down list on the right of the method name, select one of the following values:
   • Learning – to apply the method in learning mode.
   • Monitoring – to apply the method in monitoring mode.
6. After the mode is selected, wait for the name of this mode to appear in the field of the drop-down list.

   This process may take some time, during which the drop-down list displays the Changing status. Wait for the selected mode to be enabled.

See also: Asset Management methods and modes

Page top