Connecting to a sensor through the web interface

You can connect to a Kaspersky Industrial CyberSecurity for Networks sensor through the web interface. You can do the following on the sensor web interface page:

• Download the communication data package for connecting the sensor to the Kaspersky Industrial CyberSecurity for Networks Server.
• View the fingerprint of the certificate signing request to compare it with the fingerprint on the Server web interface page if the sensor is being connected to the Server automatically over the network.
• View information about the status of the connection between the sensor and the Server.

You can use any supported browser to connect to the sensor through the web interface. This connection can be established from a computer that can access the sensor computer over the network.

To connect to a Kaspersky Industrial CyberSecurity for Networks sensor:

Open your browser and enter the following into the address bar:
https://<sensor name>:<port>

where:

• <sensor name> is the IP address or name of the sensor computer used by the web server of the sensor.
• <port> is the port number used by the web server of the sensor.

If the default port number (443) is used for the sensor web server, you only need to enter the IP address or computer name of the sensor into the address bar. In this case, the HTTPS protocol and the port number will be automatically determined.

The Kaspersky Industrial CyberSecurity for Networks sensor web interface page opens in the browser window. The name of the browser bookmark for the web interface page will show the sensor name that was defined when the sensor was added.

Page top