Editing Process Control settings for a device

If Process Control settings were added for a device, you can manually edit these settings when working with the table of devices, the network interaction map, or the topology map. After saving the changes, Process Control settings for a device are considered to be custom settings. User-defined settings are not changed when Process Control settings are automatically detected for devices.

Users with any role except the Operator role can edit Process Control settings.

To edit Process Control settings for a device:

1. Connect to the Kaspersky Industrial CyberSecurity for Networks Server via the web interface under a user account that has been assigned a role with the access rights to perform this action.

   This action can be performed by a user with any role except the Operator role.

2. Select the relevant device in the Assets section on the Devices tab or in the Network map section.

   In the Network map section, you can select the relevant device on both the network interaction map and the topology map.

   The details area appears in the right part of the web interface window.

3. In the upper right corner of the details area, click the icon and select Process Control settings → Edit.

   The Edit Process Control settings window appears.

4. Configure the Process Control settings. You can edit individual settings (for example, edit the settings for tracking system commands for a specific protocol) or reconfigure all settings in the same order as you would when adding Process Control settings.

   When you edit settings that were used in previously created tags, the application automatically deletes these tags and their associated Process Control rules. For example, if you delete a protocol, after saving the settings the application will delete all tags containing the device and deleted protocol (the Process Control rules associated with these tags will also be deleted).

5. Click Save.

   This button is unavailable if not all required values are specified or if there are invalid values in the settings.

On the Process control tab, in the details area, the information in the section with the previously defined settings is refreshed.

Page top