Initially, Kaspersky Security Center gets IP ranges for polling from the network settings of the device on which it is installed. If the device address is 192.168.0.1 and the subnet mask is 255.255.255.0, Kaspersky Security Center includes the network 192.168.0.0/24 in the list of polling address automatically. Kaspersky Security Center polls all addresses from 192.168.0.1 to 192.168.0.254. You can modify the automatically defined IP ranges or add custom IP ranges.
You can create a range only for IPv4 addresses. If you enable Zeroconf polling, Kaspersky Security Center will poll the whole network.
To add a new IP range:
The new IP range is added to the list of IP ranges.
You can run polling of each IP range separately by using the Start poll button. When the polling is complete, you can view the list of discovered devices by using the Devices button. By default, the life span of the polling results is 24 hours and it is equal to the IP address lifetime setting.
To add a subnet to an existing IP range:
The new subnet is added to the IP range.
The new settings of the IP range are saved.
You can add as many subnets as you need. Named IP ranges are not allowed to overlap, but unnamed subnets inside an IP range have no such restrictions. You can enable and disable polling independently for every IP range.