Kaspersky Security Center 15.1 Windows
- Kaspersky Security Center 15.1 Help
- What's new
- About Kaspersky Security Center
- Architecture
- Hardware and software requirements
- Compatible Kaspersky applications and solutions
- Licenses and features of Kaspersky Security Center 15.1
- About compatibility of Kaspersky Security Center components
- Comparison of Kaspersky Security Center: Windows-based vs. Linux-based
- About Kaspersky Security Center Cloud Console
- Kaspersky Security Center 15.1
- Basic concepts
- Administration Server
- Hierarchy of Administration Servers
- Virtual Administration Server
- Mobile Device Server
- Web Server
- Network Agent
- Administration groups
- Managed device
- Unassigned device
- Administrator's workstation
- Management plug-in
- Management web plug-in
- Policies
- Policy profiles
- Tasks
- Task scope
- How local application settings relate to policies
- Distribution point
- Connection gateway
- Main installation scenario
- Ports used by Kaspersky Security Center
- Certificates for work with Kaspersky Security Center
- About Kaspersky Security Center certificates
- About Administration Server certificate
- Requirements for custom certificates used in Kaspersky Security Center
- Scenario: Specifying the custom Administration Server certificate
- Replacing the Administration Server certificate by using the klsetsrvcert utility
- Connecting Network Agents to Administration Server by using the klmover utility
- Reissuing the Web Server certificate
- Schemas for data traffic and port usage
- Administration Server and managed devices on LAN
- Primary Administration Server on LAN and two secondary Administration Servers
- Administration Server on LAN, managed devices on internet, reverse proxy in use
- Administration Server on LAN, managed devices on internet, connection gateway in use
- Administration Server in DMZ, managed devices on internet
- Interaction of Kaspersky Security Center components and security applications: more information
- Conventions used in interaction schemas
- Administration Server and DBMS
- Administration Server and Administration Console
- Administration Server and client device: Managing the security application
- Upgrading software on a client device through a distribution point
- Hierarchy of Administration Servers: primary Administration Server and secondary Administration Server
- Hierarchy of Administration Servers with a secondary Administration Server in DMZ
- Administration Server, a connection gateway in a network segment, and a client device
- Administration Server and two devices in DMZ: a connection gateway and a client device
- Administration Server and Kaspersky Security Center Web Console
- Activating and managing the security application on a mobile device
- Deployment best practices
- Hardening Guide
- Administration Server deployment
- Connection safety
- Accounts and authentication
- Managing protection of Administration Server
- Managing protection of client devices
- Configuring protection for managed applications
- Administration Server maintenance
- Event transfer to third-party systems
- Security recommendations for third-party information systems
- Recommendations for using Kaspersky security applications
- Preparation for deployment
- Planning Kaspersky Security Center deployment
- Typical schemes of protection system deployment
- About planning Kaspersky Security Center deployment in an organization's network
- Selecting a structure for protection of an enterprise
- Standard configurations of Kaspersky Security Center
- Selecting a DBMS for Administration Server
- Configuring the MariaDB x64 server for working with Kaspersky Security Center 15.1
- Configuring the MySQL x64 server for working with Kaspersky Security Center 15.1
- Configuring the PostgreSQL or Postgres Pro server for working with Kaspersky Security Center 15.1
- Managing mobile devices with Kaspersky Endpoint Security for Android
- Providing internet access to Administration Server
- About distribution points
- Increasing the limit of file descriptors for the klnagent service
- Calculating the number and configuration of distribution points
- Hierarchy of Administration Servers
- Virtual Administration Servers
- Information about limitations of Kaspersky Security Center
- Network load
- Preparing to mobile device management
- Information about Administration Server performance
- Network settings for interaction with external services
- Planning Kaspersky Security Center deployment
- Deploying Network Agent and the security application
- Initial deployment
- Configuring installers
- Installation packages
- MSI properties and transform files
- Deployment with third-party tools for remote installation of applications
- About remote installation tasks in Kaspersky Security Center
- Deployment by capturing and copying the image of a device
- Incorrect copying of a hard drive image
- Deployment using group policies of Microsoft Windows
- Forced deployment through the remote installation task of Kaspersky Security Center
- Running stand-alone packages created by Kaspersky Security Center
- Options for manual installation of applications
- Creating an MST file
- Remote installation of applications on devices with Network Agent installed
- Managing device restarts in the remote installation task
- Suitability of databases updating in an installation package of a security application
- Using tools for remote installation of applications in Kaspersky Security Center for running relevant executable files on managed devices
- Monitoring the deployment
- Configuring installers
- Virtual infrastructure
- Support of file system rollback for devices with Network Agent
- Local installation of applications
- Local installation of Network Agent
- Installing Network Agent in silent mode
- Installing Network Agent for Linux in silent mode (with an answer file)
- Preparing a device running Astra Linux in the closed software environment mode for installation of Network Agent
- Installing Network Agent for Linux in interactive mode
- Local installation of the application management plug-in
- Installing applications in silent mode
- Installing applications by using stand-alone packages
- Network Agent installation package settings
- Viewing the Privacy Policy
- Initial deployment
- Deploying mobile device management systems
- Deploying a system for management using iOS MDM protocol
- Installing iOS MDM Server
- Installing iOS MDM Server in silent mode
- iOS MDM Server deployment scenarios
- Simplified deployment scheme
- Deployment scheme involving Kerberos constrained delegation (KCD)
- Receiving an APNs certificate
- Renewing an APNs certificate
- Configuring a reserve iOS MDM Server certificate
- Installing an APNs certificate on an iOS MDM Server
- Configuring access to Apple Push Notification service
- Issuing and installing a shared certificate on a mobile device
- Adding a KES device to the list of managed devices
- Connecting KES devices to the Administration Server
- Integration with Public Key Infrastructure
- Kaspersky Security Center Web Server
- Deploying a system for management using iOS MDM protocol
- Hardening Guide
- Installation of Kaspersky Security Center
- Preparing for installation
- Accounts for work with the DBMS
- Scenario: Authenticating Microsoft SQL Server
- Scenario: Authenticating MySQL Server
- Scenario: Authenticating PostgreSQL Server
- Recommendations on Administration Server installation
- Creating accounts for the Administration Server services on a failover cluster
- Defining a shared folder
- Remote installation with Administration Server tools through Active Directory group policies
- Remote installation through delivery of the UNC path to a stand-alone package
- Updating from the Administration Server shared folder
- Installing images of operating systems
- Specifying the address of the Administration Server
- Standard installation
- Step 1. Reviewing the License Agreement and Privacy Policy
- Step 2. Selecting an installation method
- Step 3. Installing Kaspersky Security Center Web Console
- Step 4. Selecting network size
- Step 5. Selecting a database
- Step 6. Configuring the SQL Server
- Step 7. Selecting an authentication mode
- Step 8. Unpacking and installing files on the hard drive
- Custom installation
- Step 1. Reviewing the License Agreement and Privacy Policy
- Step 2. Selecting an installation method
- Step 3. Selecting the components to be installed
- Step 4. Installing Kaspersky Security Center Web Console
- Step 5. Selecting network size
- Step 6. Selecting a database
- Step 7. Configuring the SQL Server
- Step 8. Selecting an authentication mode
- Step 9. Selecting the account to start Administration Server
- Step 10. Selecting the account for running the Kaspersky Security Center services
- Step 11. Selecting a shared folder
- Step 12. Configuring the connection to Administration Server
- Step 13. Defining the Administration Server address
- Step 14. Administration Server address for connection of mobile devices
- Step 15. Selecting application management plug-ins
- Step 16. Unpacking and installing files on the hard drive
- Deployment of the Kaspersky Security Center failover cluster
- Scenario: Deployment of a Kaspersky Security Center failover cluster
- About the Kaspersky Security Center failover cluster
- Preparing a file server for a Kaspersky Security Center failover cluster
- Preparing nodes for a Kaspersky Security Center failover cluster
- Installing Kaspersky Security Center on the Kaspersky Security Center failover cluster nodes
- Starting and stopping cluster nodes manually
- Installing Administration Server on a Windows Server failover cluster
- Step 1. Reviewing the License Agreement and Privacy Policy
- Step 2. Selecting the type of installation on a cluster
- Step 3. Specifying the name of the virtual Administration Server
- Step 4. Specifying the network details of the virtual Administration Server
- Step 5. Specifying a cluster group
- Step 6. Selecting a cluster data storage
- Step 7. Specifying an account for remote installation
- Step 8. Selecting the components to be installed
- Step 9. Selecting network size
- Step 10. Selecting a database
- Step 11. Configuring the SQL Server
- Step 12. Selecting an authentication mode
- Step 13. Selecting the account to start Administration Server
- Step 14. Selecting the account for running the Kaspersky Security Center services
- Step 15. Selecting a shared folder
- Step 16. Configuring the connection to Administration Server
- Step 17. Defining the Administration Server address
- Step 18. Administration Server address for connection of mobile devices
- Step 19. Unpacking and installing files on the hard drive
- Installing Administration Server in silent mode
- Installing Administration Console on the administrator's workstation
- Changes in the system after Kaspersky Security Center installation
- Removing the application
- About upgrading Kaspersky Security Center
- Initial setup of Kaspersky Security Center
- Hardening Guide
- Administration Server quick start wizard
- About quick start wizard
- Starting Administration Server quick start wizard
- Step 1. Configuring a proxy server
- Step 2. Selecting the application activation method
- Step 3. Selecting the protection areas and operating systems
- Step 4. Selecting plug-ins for managed applications
- Step 5. Downloading distribution packages and creating installation packages
- Step 6. Configuring Kaspersky Security Network usage
- Step 7. Configuring email notifications
- Step 8. Configuring update management
- Step 9. Creating an initial protection configuration
- Step 10. Connecting mobile devices
- Step 11. Downloading updates
- Step 12. Device discovery
- Step 13. Closing the quick start wizard
- Configuring the connection of Administration Console to Administration Server
- Configuring the internet access settings for Administration Server
- Connecting out-of-office devices
- Scenario: Connecting out-of-office devices through a connection gateway
- Scenario: Connecting out-of-office devices through a secondary Administration Server in DMZ
- About connecting out-of-office devices
- Connecting external desktop computers to Administration Server
- About connection profiles for out-of-office users
- Creating a connection profile for out-of-office users
- About switching Network Agent to other Administration Servers
- Creating a Network Agent switching rule by network location
- Notifications of events
- Encrypt communication with TLS
- Configuring the interface
- Discovering networked devices
- Scenario: Discovering networked devices
- Unassigned devices
- Device discovery
- Working with Windows domains. Viewing and changing the domain settings
- Configuring retention rules for unassigned devices
- Working with IP ranges
- Working with the Active Directory groups. Viewing and modifying group settings
- Creating rules for moving devices to administration groups automatically
- Using VDI dynamic mode on client devices
- Equipment inventory
- Licensing
- Kaspersky applications. Centralized deployment
- Replacing third-party security applications
- Installing applications using a remote installation task
- Installing applications using Remote installation wizard
- Working with the management plug-ins
- Viewing a protection deployment report
- Remote removal of applications
- Working with installation packages
- Creating an installation package
- Creating stand-alone installation packages
- Creating custom installation packages
- Viewing and editing properties of custom installation packages
- Obtaining the Network Agent installation package from the Kaspersky Security Center distribution kit
- Distributing installation packages to secondary Administration Servers
- Distributing installation packages through distribution points
- Transferring application installation results to Kaspersky Security Center
- Defining the KSN proxy server address for installation packages
- Receiving up-to-date versions of applications
- Preparing a Windows device for remote installation
- Preparing a Linux device and installing Network Agent on a Linux device remotely
- Preparing a macOS device for remote installation of Network Agent
- Kaspersky applications: licensing and activation
- Licensing of managed applications
- Viewing information about license keys in use
- Adding a license key to the Administration Server repository
- Deleting an Administration Server license key
- Deploying a license key to client devices
- Automatic distribution of a license key
- Creating and viewing a license key usage report
- Viewing information about the application license keys
- Exporting a license key file
- Configuring network protection
- Scenario: Configuring network protection
- Policy setup and propagation: Device-centric approach
- About device-centric and user-centric security management approaches
- Manual setup of the Kaspersky Endpoint Security policy
- Manual setup of the group update task for Kaspersky Endpoint Security
- Manual setup of the group task for scanning a device with Kaspersky Endpoint Security
- Scheduling the Find vulnerabilities and required updates task
- Manual setup of the group task for updates installation and vulnerabilities fix
- Setting the maximum number of events in the event repository
- Setting the maximum storage period for the information about fixed vulnerabilities
- Managing tasks
- Creating a task
- Creating the Administration Server task
- Creating a task for specific devices
- Creating a local task
- Displaying an inherited group task in the workspace of a nested group
- Automatically turning on devices before starting a task
- Automatically turning off a device after a task is completed
- Limiting task run time
- Exporting a task
- Importing a task
- Converting tasks
- Starting and stopping a task manually
- Pausing and resuming a task manually
- Monitoring task execution
- Viewing task run results stored on the Administration Server
- Configuring filtering of information about task run results
- Modifying a task. Rolling back changes
- Comparing tasks
- Accounts to start tasks
- Exporting task execution history
- Change tasks password wizard
- Creating a hierarchy of administration groups subordinate to a virtual Administration Server
- Policies and policy profiles
- Hierarchy of policies, using policy profiles
- Managing policies
- Creating a policy
- Displaying inherited policy in a subgroup
- Activating a policy
- Activating a policy automatically at the Virus outbreak event
- Applying an out-of-office policy
- Modifying a policy. Rolling back changes
- Comparing policies
- Viewing the policy distribution status chart
- Deleting a policy
- Copying a policy
- Exporting a policy
- Importing a policy
- Converting policies
- Managing policy profiles
- Device moving rules
- Cloning device moving rules
- Software categorization
- Prerequisites for installing applications on devices of a client organization
- Viewing and editing local application settings
- Updating Kaspersky Security Center and managed applications
- Scenario: Regular updating Kaspersky databases and applications
- About updating Kaspersky databases, software modules, and applications
- About using diff files for updating Kaspersky databases and software modules
- Enabling the Downloading diff files feature
- Creating the task for downloading updates to the repository of the Administration Server
- Creating the Download updates to the repositories of distribution points task
- Configuring the Download updates to the repository of the Administration Server task
- Verifying downloaded updates
- Configuring test policies and auxiliary tasks
- Viewing downloaded updates
- Automatic installation of Kaspersky Endpoint Security updates on devices
- Offline model of update download
- Enabling and disabling the offline model of update download
- Automatic updating and patching for Kaspersky Security Center components
- Enabling and disabling automatic updating and patching for Kaspersky Security Center components
- Automatic distribution of updates
- Distributing updates to client devices automatically
- Distributing updates to secondary Administration Servers automatically
- Assigning distribution points automatically
- Assigning a device a distribution point manually
- Removing a device from the list of distribution points
- Downloading updates by distribution points
- Deleting software updates from the repository
- Patch installation for a Kaspersky application in cluster mode
- Managing third-party applications on client devices
- Installing third-party software updates
- Scenario: Updating third-party software
- Viewing information about available updates for third-party applications
- Approving and declining software updates
- Synchronizing updates from Windows Update with Administration Server
- Installing updates on devices manually
- Configuring Windows updates in a Network Agent policy
- Fixing third-party software vulnerabilities
- Scenario: Finding and fixing third-party software vulnerabilities
- About finding and fixing software vulnerabilities
- Viewing information about software vulnerabilities
- Viewing statistics of vulnerabilities on managed devices
- Scanning applications for vulnerabilities
- Fixing vulnerabilities in applications
- Fixing vulnerabilities in an isolated network
- Scenario: Fixing third-party software vulnerabilities in an isolated network
- About fixing third-party software vulnerabilities in an isolated network
- Configuring the Administration Server with internet access to fix vulnerabilities in an isolated network
- Configuring isolated Administration Servers to fix vulnerabilities in an isolated network
- Transmitting patches and installing updates in an isolated network
- Disabling the option to transmit patches and install updates in an isolated network
- Ignoring software vulnerabilities
- Selecting user fixes for vulnerabilities in third-party software
- Rules for update installation
- Groups of applications
- Using Application Control to manage executable files
- Obtaining and viewing a list of executable files stored on client devices
- Creating application categories for Kaspersky Endpoint Security for Windows policies
- Creating an application category with content added manually
- Creating an application category that includes executable files from selected devices
- Creating an application category that includes executable files from a specific folder
- Adding event-related executable files to the application category
- Configuring application startup management on client devices
- Viewing the results of static analysis of startup rules applied to executable files
- Viewing the applications registry
- Changing the software inventory start time
- About license key management of third-party applications
- Creating licensed applications groups
- Managing license keys for licensed applications groups
- Inventory of executable files
- Viewing information about executable files
- Installing third-party software updates
- Monitoring and reporting
- Scenario: Monitoring and reporting
- Monitoring traffic lights and logged events in Administration Console
- Working with reports, statistics, and notifications
- Working with reports
- Managing statistics
- Configuring event notification
- Creating a certificate for an SMTP server
- Event selections
- Device selections
- Monitoring of applications installation and uninstallation
- Events of Kaspersky Security Center components
- Blocking frequent events
- Controlling changes in the status of virtual machines
- Monitoring the anti-virus protection status using information from the system registry
- Viewing and configuring the actions when devices show inactivity
- Disabling Kaspersky announcements
- Adjustment of distribution points and connection gateways
- Standard configuration of distribution points: Single office
- Standard configuration of distribution points: Multiple small remote offices
- Assigning a managed device to act as a distribution point
- Connecting a Linux device as a gateway in the demilitarized zone
- Connecting a Linux device to the Administration Server via a connection gateway
- Adding a connection gateway in the DMZ as a distribution point
- Assigning distribution points automatically
- About local installation of Network Agent on a device selected as distribution point
- About using a distribution point as connection gateway
- Adding IP ranges to the list of ranges polled by a distribution point
- Using a distribution point as a push server
- Other routine work
- Managing Administration Servers
- Creating a hierarchy of Administration Servers: adding a secondary Administration Server
- Connecting to an Administration Server and switching between Administration Servers
- Access rights to Administration Server and its objects
- Conditions of connection to an Administration Server over the internet
- Encrypted connection to an Administration Server
- Configuring an allowlist of IP addresses to connect to Administration Server
- Using the klscflag utility to close port 13291
- Disconnecting from an Administration Server
- Adding an Administration Server to the console tree
- Removing an Administration Server from the console tree
- Adding a virtual Administration Server to the console tree
- Changing an Administration Server service account. Utility tool klsrvswch
- Changing DBMS credentials
- Changing the Administration Server shared folder
- Resolving issues with Administration Server nodes
- Viewing and modifying the settings of an Administration Server
- Adjusting the general settings of Administration Server
- Administration Console interface settings
- Event processing and storage on the Administration Server
- Viewing log of connections to the Administration Server
- Control of virus outbreaks
- Limiting traffic
- Configuring Web Server
- Working with internal users
- Backup and restoration of Administration Server settings
- Backup copying and restoration of Administration Server data
- Backup of Administration Server data task
- Data backup and recovery utility (klbackup)
- Data backup and recovery in interactive mode
- Data backup and recovery in silent mode
- Using the klbackup utility to switch managed devices under management of another Administration Server
- Backup and restoring Administration Server data when using MySQL or MariaDB
- Optimizing backup and restoration of Administration Server data
- Migration to Kaspersky Security Center Linux by using Administration Server data backup
- Moving Administration Server to another device
- Avoiding conflicts between multiple Administration Servers
- Two-step verification
- Scenario: configuring two-step verification for all users
- About two-step verification
- Enabling two-step verification for your own account
- Enabling two-step verification for all users
- Disabling two-step verification for a user account
- Disabling required two-step verification for all users
- Excluding accounts from two-step verification
- Editing the name of a security code issuer
- Configuring two-step verification for your own account
- Managing administration groups
- Managing client devices
- Connecting client devices to the Administration Server
- Manually connecting a client device to the Administration Server. Klmover utility
- Tunneling the connection between a client device and the Administration Server
- Remotely connecting to the desktop of a client device
- Connecting to devices through Windows Desktop Sharing
- Configuring the restart of a client device
- Auditing actions on a remote client device
- Checking the connection between a client device and the Administration Server
- Identifying client devices on the Administration Server
- Moving devices to an administration group
- Changing the Administration Server for client devices
- Moving devices connected to Administration Server through connection gateways to another Administration Server
- Clusters and server arrays
- Turning on, turning off, and restarting client devices remotely
- About the usage of the continuous connection between a managed device and the Administration Server
- About forced synchronization
- About connection schedule
- Sending messages to device users
- Managing Kaspersky Security for Virtualization
- Configuring the switching of device statuses
- Tagging devices and viewing assigned tags
- Remote diagnostics of client devices. Kaspersky Security Center remote diagnostics utility
- Connecting the remote diagnostics utility to a client device
- Generating a dump file for an application
- Enabling and disabling tracing, downloading the trace file
- Downloading application settings
- Downloading event logs
- Downloading multiple diagnostic information items
- Starting diagnostics and downloading the results
- Starting, stopping, and restarting applications
- UEFI protection devices
- Settings of a managed device
- General policy settings
- Network Agent policy settings
- Managing user accounts
- Working with user accounts
- Adding an account of an internal user
- Editing an account of an internal user
- Changing the number of allowed password entry attempts
- Configuring the check of the name of an internal user for uniqueness
- Adding a security group
- Adding a user to a group
- Configuring access rights to application features. Role-based access control
- Assigning the user as a device owner
- Delivering messages to users
- Viewing the list of user mobile devices
- Installing a certificate for a user
- Viewing the list of certificates issued to a user
- About the administrator of a virtual Administration Server
- Remote installation of operating systems and applications
- Creating images of operating systems
- Installing images of operating systems
- Configuring the KSN proxy server address
- Adding drivers for Windows Preinstallation Environment (WinPE)
- Adding drivers to an installation package with an operating system image
- Configuring sysprep.exe utility
- Deploying operating systems on new networked devices
- Deploying operating systems on client devices
- Creating installation packages of applications
- Issuing a certificate for installation packages of applications
- Installing applications on client devices
- Managing object revisions
- Deletion of objects
- Mobile Device Management
- Scenario: Mobile Device Management deployment
- About group policy for managing iOS MDM devices
- Enabling Mobile Device Management
- Modifying the Mobile Device Management settings
- Disabling Mobile Device Management
- Working with commands for mobile devices
- Working with certificates of mobile devices
- Starting the Certificate installation wizard
- Step 1. Selecting certificate type
- Step 2. Selecting device type
- Step 3. Selecting a user
- Step 4. Selecting certificate source
- Step 5. Assigning a tag to the certificate
- Step 6. Specifying certificate publishing settings
- Step 7. Selecting user notification method
- Step 8. Generating the certificate
- Configuring certificate issuance rules
- Integration with public key infrastructure
- Enabling support of Kerberos Constrained Delegation
- Adding iOS mobile devices to the list of managed devices
- Adding Android mobile devices to the list of managed devices
- Managing iOS MDM devices
- Signing an iOS MDM profile by a certificate
- Adding a configuration profile
- Installing a configuration profile on a device
- Removing the configuration profile from a device
- Adding a new device by publishing a link to a profile
- Adding a new device through profile installation by the administrator
- Adding a provisioning profile
- Installing a provisioning profile to a device
- Removing a provisioning profile from a device
- Adding a managed application
- Installing an app on a mobile device
- Removing an app from a device
- Configuring roaming on an iOS MDM mobile device
- Viewing information about an iOS MDM device
- Disconnecting an iOS MDM device from management
- Sending commands to a device
- Checking the execution status of commands sent
- Managing KES devices
- Data encryption and protection
- Data repositories
- Kaspersky Security Network (KSN)
- About KSN
- Setting up access to Kaspersky Security Network
- Enabling and disabling KSN
- Viewing the accepted KSN Statement
- Viewing the KSN proxy server statistics
- Accepting an updated KSN Statement
- Enhanced protection with Kaspersky Security Network
- Checking whether the distribution point works as KSN proxy server
- Switching between Online Help and Offline Help
- Managing Administration Servers
- Export of events to SIEM systems
- Configuring event export to SIEM systems
- Before you begin
- About events in Kaspersky Security Center
- About event export
- About configuring event export in a SIEM system
- Marking of events for export to SIEM systems in Syslog format
- About exporting events using Syslog format
- About exporting events using CEF and LEEF formats
- Configuring Kaspersky Security Center for export of events to a SIEM system
- Exporting events directly from the database
- Viewing export results
- Using SNMP for sending statistics to third-party applications
- Working in a cloud environment
- About work in a cloud environment
- Scenario: Deployment for a cloud environment
- Prerequisites for deploying Kaspersky Security Center in a cloud environment
- Hardware requirements for the Administration Server in a cloud environment
- Licensing options in a cloud environment
- Database options for work in a cloud environment
- Working in Amazon Web Services cloud environment
- About work in Amazon Web Services cloud environment
- Creating IAM roles and IAM user accounts for Amazon EC2 instances
- Ensuring that the Kaspersky Security Center Administration Server has the permissions to work with AWS
- Creating an IAM role for the Administration Server
- Creating an IAM user account for work with Kaspersky Security Center
- Creating an IAM role for installation of applications on Amazon EC2 instances
- Working with Amazon RDS
- Working in Microsoft Azure cloud environment
- Working in Google Cloud
- Prerequisites for client devices in a cloud environment necessary for work with Kaspersky Security Center
- Creating installation packages required to configure cloud environment
- Configuring cloud environment
- About the Configure cloud environment wizard
- Step 1. Selecting the application activation method
- Step 2. Selecting the cloud environment
- Step 3. Authorization in the cloud environment
- Step 4. Configuring synchronization with Cloud and choosing further actions
- Step 5. Configuring Kaspersky Security Network in the cloud environment
- Step 6. Configuring email notifications in the cloud environment
- Step 7. Creating an initial configuration of the protection of the cloud environment
- Step 8. Selecting the action when the operating system must be restarted during installation (for the cloud environment)
- Step 9. Receiving updates by the Administration Server
- Checking configuration
- Cloud device group
- Network segment polling
- Installing applications on devices in a cloud environment
- Viewing the properties of cloud devices
- Synchronization with cloud
- Using deployment scripts for deploying security applications
- Deployment of Kaspersky Security Center in Yandex.Cloud
- Appendices
- Advanced features
- Kaspersky Security Center operation automation. klakaut utility
- Custom tools
- Network Agent disk cloning mode
- Preparing a reference device with Network Agent installed for creating an image of operating system
- Configuring receipt of messages from File Integrity Monitor
- Administration Server maintenance
- Access to public DNS servers
- User notification method window
- Device selection window
- Define the name of the new object window
- Application categories section
- Features of using the management interface
- Reference information
- Searching and exporting data
- Settings of tasks
- Global list of subnets
- Usage of Network Agent for Windows, macOS, and Linux: comparison
- Advanced features
- Basic concepts
- Kaspersky Security Center Web Console
- Deployment diagram of Kaspersky Security Center Administration Server and Kaspersky Security Center Web Console
- Ports used by Kaspersky Security Center Web Console
- Kaspersky Security Center Web Console interface
- Pinning and unpinning sections of the main menu
- Scenario: Installation and initial setup of Kaspersky Security Center Web Console
- Installation
- Installing Kaspersky Security Center (Standard installation)
- Installing Kaspersky Security Center Web Console
- Installing Kaspersky Security Center Web Console connected to Administration Server installed on failover cluster nodes
- Upgrading Kaspersky Security Center Web Console
- Certificates for work with Kaspersky Security Center Web Console
- Migration from Kaspersky Security Center Windows
- About migration to Kaspersky Security Center Cloud Console
- About migration to Kaspersky Security Center Linux
- About migration to Kaspersky XDR Expert
- Exporting group objects from Kaspersky Security Center Windows
- Importing the export file to Kaspersky Security Center Linux
- Switching managed devices to be under management of Kaspersky Security Center Linux
- Signing in to Kaspersky Security Center Web Console and signing out
- Identity and Access Manager in Kaspersky Security Center Web Console
- About Identity and Access Manager
- Enabling Identity and Access Manager: scenario
- Configuring Identity and Access Manager in Kaspersky Security Center Web Console
- Registering Kaspersky Industrial CyberSecurity for Networks application in Kaspersky Security Center Web Console
- Lifetime of tokens and authorization timeout for Identity and Access Manager
- Downloading and distributing the IAM certificates
- Disabling Identity and Access Manager
- Configuring domain authentication by using the NTLM and Kerberos protocols
- Configuring Administration Server
- Configuring the connection of Kaspersky Security Center Web Console to Administration Server
- Configuring Administration Server connection events logging
- Configuring internet access settings for Administration Server
- Setting the maximum number of events in the event repository
- Connection settings of UEFI protection devices
- Creating a hierarchy of Administration Servers: adding a secondary Administration Server
- Viewing the list of secondary Administration Servers
- Deleting a hierarchy of Administration Servers
- Administration Server maintenance
- Configuring the interface
- Managing virtual Administration Servers
- Enabling account protection from unauthorized modification
- Two-step verification
- Scenario: Configuring two-step verification for all users
- About two-step verification
- Enabling two-step verification for your own account
- Enabling required two-step verification for all users
- Disabling two-step verification for a user account
- Disabling required two-step verification for all users
- Excluding accounts from two-step verification
- Generating a new secret key
- Editing the name of a security code issuer
- Configuring two-step verification for your own account
- Prohibit new users from setting up two-step verification for themselves
- Backup copying and restoration of Administration Server data
- Moving Administration Server to another device
- Initial setup of Kaspersky Security Center Web Console
- Quick start wizard (Kaspersky Security Center Web Console)
- Step 1. Specifying the internet connection settings
- Step 2. Downloading required updates
- Step 3. Selecting the assets to secure
- Step 4. Selecting encryption in solutions
- Step 5. Configuring installation of plug-ins for managed applications
- Step 6. Installing the selected plug-ins
- Step 7. Downloading distribution packages and creating installation packages
- Step 8. Configuring Kaspersky Security Network
- Step 9. Selecting the application activation method
- Step 10. Specifying the third-party update management settings
- Step 11. Creating a basic network protection configuration
- Step 12. Configuring email notifications
- Step 13. Performing a network poll
- Step 14. Closing the quick start wizard
- Connecting out-of-office devices
- Scenario: Connecting out-of-office devices through a connection gateway
- Scenario: Connecting out-of-office devices through a secondary Administration Server in DMZ
- About connecting out-of-office devices
- Connecting external desktop computers to Administration Server
- About connection profiles for out-of-office users
- Creating a connection profile for out-of-office users
- About switching Network Agent to other Administration Servers
- Creating a Network Agent switching rule by network location
- Quick start wizard (Kaspersky Security Center Web Console)
- Protection deployment wizard
- Starting Protection deployment wizard
- Selecting the installation package
- Selecting a method for distribution of key file or activation code
- Selecting Network Agent version
- Selecting devices
- Step 5. Specifying the remote installation task settings
- Step 6. Restart management
- Step 7. Removing incompatible applications before installation
- Step 8. Moving devices to Managed devices
- Step 9. Selecting accounts to access devices
- Step 10. Starting installation
- Kaspersky applications deployment through Kaspersky Security Center Web Console
- Scenario: Kaspersky applications deployment through Kaspersky Security Center Web Console
- Getting plug-ins for Kaspersky applications
- Downloading and creating installation packages for Kaspersky applications
- Changing the limit on the size of custom installation package data
- Downloading distribution packages for Kaspersky applications
- Checking that Kaspersky Endpoint Security is deployed successfully
- Creating stand-alone installation packages
- Viewing the list of stand-alone installation packages
- Creating custom installation packages
- Distributing installation packages to secondary Administration Servers
- Installing applications using a remote installation task
- Specifying settings for remote installation on Unix devices
- Starting and stopping Kaspersky applications
- Mobile Device Management
- Replacing third-party security applications
- Discovering networked devices
- Kaspersky applications: licensing and activation
- Licensing of managed applications
- Adding a license key to the Administration Server repository
- Adding an Administration Server license key
- Deploying a license key to client devices
- Automatic distribution of a license key
- Viewing information about license keys in use
- Deleting a license key from the repository
- Revoking consent with an End User License Agreement
- Renewing licenses for Kaspersky applications
- Using Kaspersky Marketplace to choose Kaspersky business solutions
- Configuring network protection
- Scenario: Configuring network protection
- About device-centric and user-centric security management approaches
- Policy setup and propagation: Device-centric approach
- Policy setup and propagation: User-centric approach
- Network Agent policy settings
- Enabling and disabling the low resource consumption mode for Network Agent
- Manual setup of the Kaspersky Endpoint Security policy
- Configuring Kaspersky Security Network
- Checking the list of the networks protected by Firewall
- Disabling the scan of network drives
- Excluding software details from the Administration Server memory
- Configuring access to the Kaspersky Endpoint Security for Windows interface on workstations
- Saving important policy events in the Administration Server database
- Manual setup of the group update task for Kaspersky Endpoint Security
- Granting offline access to the external device blocked by Device Control
- Removing applications or software updates remotely
- Tasks
- Managing client devices
- Settings of a managed device
- Creating administration groups
- Adding devices to an administration group manually
- Moving devices or clusters to an administration group manually
- Creating device moving rules
- Copying device moving rules
- Conditions for a device moving rule
- About clusters and server arrays
- Properties of a cluster or server array
- Viewing and configuring the actions when devices show inactivity
- About device statuses
- Configuring the switching of device statuses
- Remotely connecting to the desktop of a client device
- Connecting to devices through Windows Desktop Sharing
- Device selections
- Device tags
- Creating a device tag
- Renaming a device tag
- Deleting a device tag
- Viewing devices to which a tag is assigned
- Viewing tags assigned to a device
- Tagging a device manually
- Removing an assigned tag from a device
- Viewing rules for tagging devices automatically
- Editing a rule for tagging devices automatically
- Creating a rule for tagging devices automatically
- Running rules for auto-tagging devices
- Deleting a rule for tagging devices automatically
- Managing device tags by using the klscflag utility
- Policies and policy profiles
- About policies and policy profiles
- About lock and locked settings
- Inheritance of policies and policy profiles
- Managing policies
- Viewing the list of policies
- Creating a policy
- Modifying a policy
- General policy settings
- Enabling and disabling a policy inheritance option
- Copying a policy
- Moving a policy
- Exporting a policy
- Importing a policy
- Viewing the policy distribution status chart
- Activating a policy automatically at the Virus outbreak event
- Deleting a policy
- Managing policy profiles
- Data encryption and protection
- Users and user roles
- About user roles
- Viewing user accounts and sessions
- Configuring access rights to application features. Role-based access control
- Adding an account of an internal user
- Creating a security group
- Editing an account of an internal user
- Editing a security group
- Assigning a role to a user or a security group
- Adding user accounts to an internal security group
- Assigning a user as a device owner
- Assigning a user as a Linux device owner after installation of Network Agent
- Deleting a user or a security group
- Changing the password for a user account
- Creating a user role
- Editing a user role
- Editing the scope of a user role
- Deleting a user role
- Associating policy profiles with roles
- Changing account password
- Revoking local administrator rights
- Managing object revisions
- Deletion of objects
- Kaspersky Security Network (KSN)
- Scenario: Upgrading Kaspersky Security Center and managed security applications
- Updating Kaspersky databases and applications
- Scenario: Regular updating Kaspersky databases and applications
- About updating Kaspersky databases, software modules, and applications
- Creating the Download updates to the Administration Server repository task
- Verifying downloaded updates
- Creating the Download updates to the repositories of distribution points task
- Enabling and disabling automatic updating and patching for Kaspersky Security Center components
- Automatic installation of updates for Kaspersky Endpoint Security for Windows
- Approving and declining software updates
- Updating Administration Server
- Enabling and disabling the offline model of update download
- Updating Kaspersky databases and software modules on offline devices
- Backing up and restoring web plug-ins
- Adjustment of distribution points and connection gateways
- Standard configuration of distribution points: Single office
- Standard configuration of distribution points: Multiple small remote offices
- About assigning distribution points
- Assigning distribution points automatically
- Assigning distribution points manually
- Modifying the list of distribution points for an administration group
- Forced synchronization
- Enabling a push server
- Managing third-party applications on client devices
- About third-party applications
- Installing third-party software updates
- Scenario: Updating third-party software
- Installing third-party software updates
- Creating the Find vulnerabilities and required updates task
- Find vulnerabilities and required updates task settings
- Creating the Install required updates and fix vulnerabilities task
- Adding rules for update installation
- Creating the Install Windows Update updates task
- Viewing information about available third-party software updates
- Exporting the list of available software updates to a file
- Approving and declining third-party software updates
- Creating the Perform Windows Update synchronization task
- Updating third-party applications automatically
- Fixing third-party software vulnerabilities
- Scenario: Finding and fixing third-party software vulnerabilities
- About finding and fixing software vulnerabilities
- Fixing third-party software vulnerabilities
- Creating the Fix vulnerabilities task
- Creating the Install required updates and fix vulnerabilities task
- Adding rules for update installation
- Selecting user fixes for vulnerabilities in third-party software
- Viewing information about software vulnerabilities detected on all managed devices
- Viewing information about software vulnerabilities detected on the selected managed device
- Viewing statistics of vulnerabilities on managed devices
- Exporting the list of software vulnerabilities to a file
- Ignoring software vulnerabilities
- Managing applications run on client devices
- Using Application Control to manage executable files
- Application Control modes and categories
- Obtaining and viewing a list of executable files stored on client devices
- Creating application category with content added manually
- Creating an application category that includes executable files from selected devices
- Creating an application category that includes executable files from selected folder
- Viewing the list of application categories
- Adding event-related executable files to the application category
- Configuring Application Control in the Kaspersky Endpoint Security for Windows policy
- Obtaining and viewing a list of applications installed on client devices
- Using Application Control to manage executable files
- Creating an installation package of a third-party application from the Kaspersky database
- Viewing and modifying the settings of an installation package of a third-party application from the Kaspersky database
- Settings of an installation package of a third-party application from the Kaspersky database
- Application tags
- Monitoring and reporting
- Scenario: Monitoring and reporting
- About types of monitoring and reporting
- Dashboard and widgets
- Reports
- Events and event selections
- About Kaspersky Security Center events
- Using event selections
- Creating an event selection
- Editing an event selection
- Viewing a list of an event selection
- Exporting an event selection
- Importing an event selection
- Viewing details of an event
- Exporting events to a file
- Viewing an object history from an event
- Deleting events
- Deleting event selections
- Setting the storage term for an event
- Events of Kaspersky Security Center components
- Blocking frequent events
- Receiving events from Kaspersky Security for Microsoft Exchange Servers
- Notifications and device statuses
- Kaspersky announcements
- Viewing information about the detects of threats
- Cloud Discovery
- Kaspersky Security Center Web Console activity logging
- Integration between Kaspersky Security Center and other solutions
- Establishing a background connection
- Exporting events to SIEM systems
- Configuring event export to SIEM systems
- Before you begin
- About events in Kaspersky Security Center
- About event export
- About configuring event export in a SIEM system
- Marking of events for export to SIEM systems in Syslog format
- About exporting events using CEF and LEEF formats
- Converting events to the CEF or LEEF format
- About exporting events using Syslog format
- Configuring Kaspersky Security Center for export of events to a SIEM system
- Exporting events directly from the database
- Viewing export results
- Working with Kaspersky Security Center Web Console in a cloud environment
- Cloud environment configuration in Kaspersky Security Center Web Console
- Step 1. Checking the required plug-ins and installation packages
- Step 2. Licensing the application
- Step 3. Selecting the cloud environment and authorization
- Step 4. Segment polling, configuring synchronization with Cloud and choosing further actions
- Step 5. Selecting an application to create a policy and tasks for
- Step 6. Configuring Kaspersky Security Network for Kaspersky Security Center
- Step 7. Creating an initial configuration of protection
- Network segment polling via Kaspersky Security Center Web Console
- Adding connections for cloud segment polling
- Deleting a connection for cloud segment polling
- Configuring the polling schedule via Kaspersky Security Center Web Console
- Viewing the results of cloud segment polling via Kaspersky Security Center Web Console
- Viewing the properties of cloud devices via Kaspersky Security Center Web Console
- Synchronization with Cloud: Configuring the moving rule
- Remote installation of applications to the Azure virtual machines
- Creating Backup of the Administration Server data task by using a cloud DBMS
- Cloud environment configuration in Kaspersky Security Center Web Console
- Remote diagnostics of client devices
- Opening the remote diagnostics window
- Enabling and disabling tracing for applications
- Downloading trace files of an application
- Deleting trace files
- Downloading application settings
- Downloading event logs
- Starting, stopping, restarting the application
- Running the remote diagnostics of Kaspersky Security Center Network Agent and downloading the results
- Running an application on a client device
- Generating a dump file for an application
- Running remote diagnostics on a Linux-based client device
- Downloading and deleting files from Quarantine and Backup
- Changing the language of the Kaspersky Security Center Web Console interface
- API Reference Guide
- Best Practices for Service Providers
- Planning Kaspersky Security Center deployment
- Deployment and initial setup
- Recommendations on Administration Server installation
- Configuring protection on a client organization's network
- Manual setup of the Kaspersky Endpoint Security policy
- Manual setup of the group update task for Kaspersky Endpoint Security
- Manual setup of the group task for scanning a device with Kaspersky Endpoint Security
- Scheduling the Find vulnerabilities and required updates task
- Manual setup of the group task for updates installation and vulnerabilities fix
- Building a structure of administration groups and assigning distribution points
- Hierarchy of policies, using policy profiles
- Tasks
- Device moving rules
- Software categorization
- About multi-tenant applications
- Backup and restoration of Administration Server settings
- Deploying Network Agent and the security application
- Initial deployment
- Configuring installers
- Installation packages
- MSI properties and transform files
- Deployment with third-party tools for remote installation of applications
- General information about the remote installation tasks in Kaspersky Security Center
- Deployment using group policies of Microsoft Windows
- Forced deployment through the remote installation task of Kaspersky Security Center
- Running stand-alone packages created by Kaspersky Security Center
- Options for manual installation of applications
- Remote installation of applications on devices with Network Agent installed
- Managing device restarts in the remote installation task
- Suitability of databases updating in an installation package of an anti-virus application
- Removing incompatible third-party security applications
- Removing password-protected Network Agent by using the command prompt
- Using tools for remote installation of applications in Kaspersky Security Center for running relevant executable files on managed devices
- Monitoring the deployment
- Configuring installers
- Virtual infrastructure
- Support of file system rollback for devices with Network Agent
- Initial deployment
- About connection profiles for out-of-office users
- Deploying the Mobile Device Management feature
- Other routine work
- Sizing Guide
- About this Guide
- Information about limitations of Kaspersky Security Center
- Calculations for Administration Servers
- Calculations for distribution points and connection gateways
- Logging of information about events for tasks and policies
- Specific considerations and optimal settings of certain tasks
- Details of network load spread among Administration Server and protected devices
- Contact Technical Support
- Sources of information about the application
- Glossary
- Active key
- Additional (or reserve) license key
- Administration Console
- Administration group
- Administration Server
- Administration Server certificate
- Administration Server client (Client device)
- Administration Server data backup
- Administrator rights
- Administrator's workstation
- Amazon EC2 instance
- Amazon Machine Image (AMI)
- Anti-virus databases
- Anti-virus protection service provider
- Application Shop
- Authentication Agent
- Available update
- AWS Application Program Interface (AWS API)
- AWS IAM access key
- AWS Management Console
- Backup folder
- Broadcast domain
- Centralized application management
- Client administrator
- Cloud Discovery
- Cloud environment
- Configuration profile
- Connection gateway
- Demilitarized zone (DMZ)
- Device owner
- Direct application management
- Distribution point
- Event repository
- Event severity
- Forced installation
- Group task
- Hardening Guide
- Home Administration Server
- HTTPS
- IAM role
- IAM user
- Identity and Access Management (IAM)
- Incompatible application
- Installation package
- Internal users
- iOS MDM device
- iOS MDM profile
- iOS MDM Server
- JavaScript
- Kaspersky Private Security Network (KPSN)
- Kaspersky Security Center Administrator
- Kaspersky Security Center Operator
- Kaspersky Security Center System Health Validator (SHV)
- Kaspersky Security Center Web Server
- Kaspersky Security Network (KSN)
- Kaspersky update servers
- KES device
- Key file
- License term
- Licensed applications group
- Local installation
- Local task
- Managed devices
- Management plug-in
- Manual installation
- MITM attack
- Mobile Device Server
- Network Agent
- Network anti-virus protection
- Network protection status
- Patch importance level
- Policy
- Program settings
- Protection status
- Provisioning profile
- Remote installation
- Restoration
- Restoration of Administration Server data
- Service provider's administrator
- Shared certificate
- SSL
- Task
- Task for specific devices
- Task settings
- UEFI protection device
- Update
- Upgrade of Kaspersky Security Center
- Virtual Administration Server
- Virus activity threshold
- Virus outbreak
- Vulnerability
- Windows Server Update Services (WSUS)
- Information about third-party code
- Trademark notices
- Known issues
Kaspersky Security Center 15.1 > Schemas for data traffic and port usage > Interaction of Kaspersky Security Center components and security applications: more information > Administration Server and two devices in DMZ: a connection gateway and a client device
Administration Server and two devices in DMZ: a connection gateway and a client device
Administration Server and two devices in DMZ: a connection gateway and a client device
Administration Server with a connection gateway and a client device in DMZ
For schema clarifications, see the table below.
Administration Server with a connection gateway in a network segment and a client device (traffic)
Device |
Port number |
Name of the process that opens the port |
Protocol |
TLS |
Port purpose |
|---|---|---|---|---|---|
Network Agent |
13000 |
klnagent |
TCP |
Yes |
Receiving connections from Network Agents |
|
See also: Conventions used in interaction schemas Interaction of Kaspersky Security Center components and security applications: more information |
Article ID: 158534, Last review: Mar 23, 2025