You must perform device discovery before installation of the security applications. The Administration Server receives information about discovered devices and allows you to manage the devices through policies. Regular network polls are needed to update the list of devices available in the network.
Before you start network polling, make sure that the SMB protocol is enabled. Otherwise, Kaspersky Security Center cannot discover devices in the polled network. To enable the SMB protocol, follow the instructions for your operating system.
Discovery of networked devices proceeds in the following stages:
The quick start wizard guides you through initial device discovery, and helps you find networked devices such as computers, tablets, and mobile phones. You can also perform device discovery manually.
Decide which polling type(s) you want to use regularly. Enable the desired types and configure the poll schedule as you see fit. You can refer to the recommendations for network polling frequency.
If new devices appear on your network, they are discovered during regular polls and are automatically included in the Unassigned devices group. You can set up device moving rules to automate the allocation of devices to the Managed devices group. You can also configure retention rules.
If you skip the step 3, the newly discovered devices are allocated to the Unassigned devices group. If you want, you can move these devices to the Managed devices group manually. If you move the devices to the Managed devices group manually, you can analyze information about each device and decide whether you want to move it to an administration group, and, if so, to which exact group.
Results
Completion of the scenario yields the following: