Step 5. Specifying node settings

At this step, you can specify the IP address of the node, the port number for machine-to-machine communication within the cluster, and the port number through which the KSMG web interface will be available.

The script suggests the following default port numbers: 9045 for machine-to-machine communication and 443 for the web interface. If these ports are not free, the script does not offer a default value; you must manually enter free port numbers.

If you want to use the default values, press Enter for each setting.

To specify KSMG node settings:

1. Enter the IP address of the current node and press Enter.

   This IP address will be used for machine-to-machine communication within the cluster.

2. Enter the port number of the current node and press Enter.

   This port number will be used for machine-to-machine communication within the cluster.

3. Enter the port number of the current node to be used by the KSMG web interface and press ENTER.

   A non-default value is necessary if the web server is used to provide web interfaces for different systems, and the default port is already in use.

Page top