Configuring the Redirector mode

To configure the Redirector mode:

1. Open the Traffic Security window.
2. On the General tab, select Redirector mode.
3. In the Task mode settings block, configure the following settings:
   • Check safe connections through the HTTPS protocol.
     

     If the check box is selected, intercepted encrypted HTTPS traffic is decompressed and scanned for threats.

     If the check box is cleared, encrypted HTTPS traffic is not decompressed.

     The check box is selected by default.

     Scanning is available only if the HTTPS port is open.

   • Select the versions of the cryptographic protocol that you want to use:
     • TLS 1.0
     • TLS 1.1
     • TLS 1.2

     All versions are selected by default. Moreover, the TLS 1.0 option cannot be disabled.

     Note, that you can use the TLS protocol in the Traffic Security task configuration only on protected devices running Microsoft Windows 7 or later, Microsoft Windows Server 2008 R2 or later.

   • Redirect traffic to proxy server after scanning.
     

     If the check box is selected, Kaspersky Security for Windows Server redirects traffic that has already been scanned to an external proxy, for example, a corporate proxy server that is used within the corporate network.

     If the check box is cleared, traffic is sent directly to an internal proxy.

     • Proxy server address.
       

       The address of the internal terminal proxy server used for redirection. Enter the address in IPv4 format.

     • Port.
       

       The port number for the internal proxy.

   • Security port.
     

     Specify the port number used to redirect traffic from the browser or network driver to the inner port created by Kaspersky Security for Windows Server in order to detect web-based threats. We recommend that you do not modify the default port. The port number must not coincide with any ports that are open for the ICAP service. If you use the Redirector mode, ports that are already being used are listed in the Check safe connections through the HTTPS protocol field.

   For Redirector mode, the operating system must be configured to transfer encrypted traffic via the port specified by Kaspersky Security for Windows Server.

4. Click OK.

The task mode configuration is saved.

Page top