Configuring addressing

To set up connection with protected clusters and gain access to network attached storage:

1. Open the Anti-Cryptor for NetApp window.
2. Open the Addressing tab in the task settings.
3. In the Connection section configure the following:
   • IP address of protected cluster
     

     Specify the IP address of the cluster. A cluster contains the following types of Vservers:

     • Admin Vserver
     • Node Vserver
     • Cluster Vserver
   • Vserver name
     

     Specify a name of a virtual storage server.

   • FPolicy name
     

     Specify the name of the FPolicy. Before FPolicy can monitor file access, an FPolicy configuration must be created and enabled on the Vserver for which FPolicy services are required.

   • Port
4. In the Authentication section, enter the following data:
   • Credentials of a user with a privileged access to network attached storage folders: login and password.

     This account should coincide with the account that has been defined during _POLICY CREATE operation on network attached storage side.

   • Credentials of a CDOT Administrator: login and password.
5. In the List of cluster nodes section, do the following to edit the list of protected cluster nodes:
   1. Click the Add button.
   2. In the window that opens, enter the node name.
   3. Click OK.

      All existing nodes of a protected cluster must be added to the list.

6. Click OK in the Anti-Cryptor for NetApp window.

The configured addressing settings are saved.

Page top