Network properties window
Expand all | Collapse all
Connection type
Type of network connection (for example, Internet connection, wired Ethernet connection, wireless connection).
Status
Current status of the network connection: connected or disconnected.
Created
Date and time when the connection was created.
Name
Network type
Field that shows the description of the network.
Additional network connection settings are available for local and public networks.
Addresses
Range of addresses within the network. Displayed using IPv4 and/or IPv6 address assignment.
In the Additional subnetworks section, you can expand the range of addresses in the network.
Add
Clicking this button opens the IP address window. In this window, you can add an address to the list.
Delete
Clicking this button removes the selected address from the list.
In the section for adding new IP addresses, you can specify the settings of a new IP address to add to the subnet. This section is available if you click the Add button.
IP address
Address or mask of addresses included in the network. You can specify an IP address or a DNS name (for example, IP 91.103.64.6
, DNS name kaspersky.com
).
Add
Clicking this button shows the specified IP address in the list of IP addresses in the subnet.
In the Notifications section, you can configure the mode for notifications about changes on the network.
Notify on connection to network
This check box enables / disables notifications by Firewall when a network is connected.
Notify on new MAC address
The check box enables / disables notifications by Firewall regarding a change in the MAC address.
For example, if this check box is selected, Firewall informs you of a change in network adapter.
Notify when the mapping between MAC address and IP address is changed
This check box enables / disables notifications by Firewall that inform you of changes in the correspondence between a MAC address and an IP address.
For example, if this check box is selected, Firewall informs you when the DHCP service assigns a different IP address.
In the Default printer section, you can configure printer communication settings when connecting.
Select printer on connection to network
This check box enables / disables use by default of the printer selected in the drop-down list.
The check box is available if a printer is installed in the operating system on your computer.
Page top