Configuring export of CryptoPro NGate events to KUMA

To configure the sending of events from CryptoPro NGate to KUMA:

  1. Connect to the web interface of the NGate management system.
  2. Connect remote syslog servers to the management system. To do so:
    1. Open the page with the list of syslog servers: External ServicesSyslog ServerAdd Syslog Server.
    2. Enter the settings of the syslog server and click plus.
  3. Assign syslog servers to the configuration for recording logs of the cluster. To do so:
    1. In the ClustersSummary section, select the cluster that you want to configure.
    2. On the Configurations tab, click the Configuration control for the relevant cluster to go to the configuration settings page.
    3. In field 

      Syslog Servers

       of the configuration you are configuring, click 

      Assign

      .

    4. Select the check boxes for syslog servers that you want to assign and click

      the plus icon.

      You can assign an unlimited number of servers.

      To add new syslog servers, click plus.

    5. Publish the configuration to activate the new settings.

  4. Assign syslog servers to the management system for recording Administrator activity logs. To do so:

    1. Select the Management Center Settings menu item and on the page that is displayed, under Syslog servers, click Assign.
    2. In the Assign Syslog Servers to Management Center window, select the check box for those syslog servers that you want to assign, then click Apply and assign.

      You can assign an unlimited number of servers.

As a result, events of CryptoPro NGate are sent to KUMA.

Page top