Filtering and searching hosts with the Endpoint Agent component by computer IP address

To filter or search for hosts with the Endpoint Agent component by IP address of the computer on which the application is installed:

  1. Select the Endpoint Agents section in the window of the application web interface.

    This opens the table of hosts.

  2. Click the IP link to open the filter configuration window.
  3. In the drop-down list, select one of the following filtering operators:
    • Contain
    • Not contain
  4. In the entry field, specify one or several characters of the computer IP address. You can enter the IP address or subnet mask in IPv4 format (for example, 192.0.0.1 or 192.0.0.0/16).
  5. To add a filter condition using a different criterion, click Apt_icon_alerts_add_filter and specify the filter condition.
  6. If you want to delete the filter condition, click the kata_icon_delete_ep button to the right of the field.
  7. Click Apply.

The filter configuration window closes.

The table displays only those hosts that match the filter criteria you have set.

You can use multiple filters at the same time.

See also

Managing Endpoint Agent host information

Viewing the table of hosts with the Endpoint Agent component

Configuring the display of the table of hosts with the Endpoint Agent component

Viewing information about a host

Filtering and searching hosts with the Endpoint Agent component by host name

Filtering and searching hosts with the Endpoint Agent component that have been isolated from the network

Filtering and searching hosts with the Endpoint Agent component by PCN and SCN server names

Filtering and searching hosts with the Endpoint Agent component by operating system version on the computer

Filtering and searching hosts with the Endpoint Agent component by component version

Filtering and searching hosts with the Endpoint Agent component by their activity

Quickly creating a filter for hosts with the Endpoint Agent component

Resetting the filter for hosts with the Endpoint Agent component

Removing hosts with the Endpoint Agent component

Configuring activity indicators of the Endpoint Agent component

Supported interpreters and processes

Page top