Viewing the table of connectors

The table of connectors is displayed in the Settings section, Connectors subsection, on the Connectors tab.

Connector settings are displayed in the following columns of the table:

• Name.

  The name specified for the connector.

• Connector ID.

  ID assigned to the connector when it was created.

• Enabled.

  Indicates whether the Central Node is ready to interact with the software modules of the connector. If this setting has a value of No, the Central Node server does not accept requests from application modules of the connector.

• Status.

  Status of software modules of the connector. The following statuses are possible:

  • Awaiting registration: after adding an unmanaged connector or creating a new communication data package for the unmanaged connector, no connection has been established through this connector.
  • Switchover: the status of application modules of the connector is switched from Off to On, or vice versa.
  • Off means that the Central Node server is not accepting requests from application modules of the connector. If the connector is managed, a stop command is sent to its application modules.
  • On means a connection was successfully established through this connector using the certificate created for this connector.
  • Error means an error occurred when attempting to perform actions with the application modules of the connector.
• Type.

  Icon and name of the connector type.

• Last connection.

  Date and time of the last connection through the connector.

• Manageable.

  Indicates that the connector is managed. If this is set to No, the connector is either unmanaged, or is configured to ignore the managed connector functionality.

• Changed.

  Date and time of the last modification of connector settings.

• Description.

  The description specified for the connector.

When viewing the table of connectors, you can use the configuration, filtering, searching, and sorting functionality.

Page top