This section describes the hardware and software requirements for Central Node servers that are deployed on KVM and VMware ESXi virtual platforms and have between 50 and 750 Endpoint Agent components connected. Hardware requirements for servers with more Endpoint Agents are connected are provided in the Calculations for the Central Node component section.
To deploy the application on the KVM virtual platform, you need to install the KVM hypervisor based on the Debian GNU/Linux 12 operating system using QEMU 8.0.2.
The software requirements for the VMware ESXi virtual platform are provided in the Hardware and software requirements section.
When deploying Central Node on a virtual platform, you must keep in mind the following limitations:
The hardware requirements for the Central Node server depending on the functionality being used are listed in the table below.
Hardware requirements of the Central Node server when using KEDR functionality
Maximum number of hosts with the Endpoint Agent component |
Maximum number of email messages per minute |
Maximum volume of traffic from SPAN ports on the server with the Central Node component (Mbps) |
Minimum number of logical cores at 3 GHz |
Minimum RAM (GB) |
---|---|---|---|---|
50 |
0 |
0 |
4 |
31 |
100 |
0 |
0 |
4 |
31 |
150 |
0 |
0 |
6 |
31*/32 |
250 |
0 |
0 |
6 |
31/32 |
500 |
0 |
0 |
8 |
31/34 |
750 |
0 |
0 |
10 |
31/38 |
* The value before the slash represents the amount of RAM required to install the Central Node component. After installation, the amount of RAM must be brought up to the value after the slash.
Hardware requirements of the Central Node server when using KATA and KEDR functionality
Maximum number of hosts with the Endpoint Agent component |
Maximum number of email messages per minute |
Maximum volume of traffic from SPAN ports on the server with the Central Node component (Mbps) |
Minimum number of logical cores at 3 GHz |
Minimum RAM (GB) |
---|---|---|---|---|
100 |
1 |
20 |
6 |
31*/32 |
250 |
5 |
50 |
6 |
31/32 |
500 |
30 |
100 |
12 |
31/40 |
750 |
30 |
100 |
12 |
31/46 |
* The value before the slash represents the amount of RAM required to install the Central Node component. After installation, the amount of RAM must be brought up to the value after the slash.
Page top