Viewing network interface information
The network interface card in the Sensor servers section of the application web interface displays the following information:
- Network interface name
- MAC address of the network interface
- IP address of the network interface
- Network interface bandwidth
- Blink. This link lets you identify the Ethernet port associated with a network interface
If a monitoring point has been added to the network interface, the following information about the monitoring point is displayed in the card of the network interface:
- Monitoring point name.
- Technology mode is the state of the technology inheritance functionality. It can be Enabled or Disabled.
You can view network interface details.
To view network interface details:
- Select the Sensor servers section in the window of the application web interface.
- Click the card of the relevant network interface.
This opens a window with information about the network interface.
The network interface card displays the following information:
- Network interface is the name of the network interface in the operating system.
- Connection is the icon indicating that a network cable is connected to the Ethernet port of the network interface:
– the network cable is connected.
– the network cable is disconnected. The icon blinks when the Ethernet port indication mode is enabled.
- MAC address is the MAC address of the network interface.
- IP address is the IP address of the network interface.
If multiple IP addresses are found on the network interface, a maximum of 16 IP addresses are displayed in the details area.
If a monitoring point has been added to the network interface, the following information is displayed in the card of the network interface:
- Status is the current status of the monitoring point indicated by an icon and a text description:
OК. The monitoring point is available.
Switchover. The operating mode of the monitoring point is being changed.
Error. An error was detected when switching over the operating mode of the monitoring point.
- Connection is the icon indicating that a network cable is connected to the Ethernet port of the network interface:
- – the network cable is connected.
- – the network cable is disconnected.
The icon blinks when the Ethernet port indication mode is enabled.
- Network interface is the name of the network interface in the operating system.
- Mode is the current mode of the monitoring point:
- Enabled.
- Disabled.
- On the Settings tab:
- The Inheritance of technologies indicates whether inheritance of technologies is enabled or disabled for the server.
- MAC address is the MAC address of the network interface.
- IP address is the IP address of the network interface.