This example demonstrates use of the iperf
library in KasperskyOS.
In this example, the Server
program uses the iperf
library.
By default, the example uses network software emulation (SLIRP) in QEMU. If you configured TAP interfaces for QEMU, you need to change the network settings for starting QEMU (QEMU_FLAGS
variable) in the einit/CMakeLists.txt
file to make sure that the example works correctly (for more details, see the comments in the file).
The example does not use DHCP, therefore the IP address of the network interface must be manually indicated in the code of the Server
program (server/src/main.cpp
). SLIRP uses the default values.
The iperf
library in the example is used in server mode. To connect to this server, install the iperf3
program on the host machine and run it by using the iperf3 -c localhost
command. If you configured TAP interfaces, indicate the current IP address instead of localhost
.
The first startup of the example may take a long time because the iperf
client uses /dev/urandom
to fill packets with random data. To avoid this, run the iperf
client with the --repeating-payload
parameter.
The CMake
system, which is included with KasperskyOS Community Edition, is used to build and run the example.
Example files
The code of the example and build scripts are available at the following path:
/opt/KasperskyOS-Community-Edition-<version>/examples/iperf_separate_vfs
Building and running example
See Building and running examples section.
Page top