Initial configuration of the Network Agent using the command line

To configure Network Agent settings:

1. Execute the command:
   • for a 32-bit operating system:

     # /opt/kaspersky/klnagent/lib/bin/setup/postinstall.pl

   • for a 64-bit operating system:

     # /opt/kaspersky/klnagent64/lib/bin/setup/postinstall.pl

2. Accept the End User License Agreement.
3. Specify the DNS name or IP address of the Administration Server.
4. Specify the port number of the Administration Server.

   Port 14000 is used by default.

5. If you want to use an SSL connection, specify the SSL port number of the Administration Server.

   Port 13000 is used by default.

6. Do one of the following:
   • Enter yes if you want to use an SSL connection.
   • Enter no if you do not want to use an SSL connection.

   By default, SSL connection is enabled.

7. If necessary, specify the connection gateway usage mode:
   • 1—Do not configure a connection gateway.
   • 2—Do not use a connection gateway.
   • 3—Connect to the Administration Server using a connection gateway.
   • 4—Use the Network Agent as a connection gateway.

   The default value is the first option.

For more detailed information about configuring Network Agent, please refer to the Kaspersky Security Center documentation.

Page top