Configuring the duration of automatic network isolation

You can configure the duration of automatic network isolation only if integrated with Kaspersky Endpoint Detection and Response Optimum:

Network isolation of devices isolated by the IOC Scan task is automatically disabled after a certain length of time. You can configure this timeout in the Web Console in the device properties and in policy properties. The network isolation settings in the policy properties in the Web Console are described in Appendix 5. The network isolation settings in the managed device properties are described in the table below.

If a policy is applied to the device, the settings specified in the policy are applied; the automatic network isolation timeout cannot be configured in the device properties. If a policy is not applied to the device, the settings specified in the device properties are applied.

By default, the application disables network isolation 5 hours after it is enabled. With network isolation disabled, the device can operate on the network without restrictions.

Configuring the automatic disabling of network isolation in the device properties

To configure the automatic disabling of device network isolation:

  1. In the main window of the Web Console, select Assets (Devices) → Managed devices.

    The list of managed devices opens.

  2. Select the administration group containing the necessary device. To do so, click the link in the Current path field above the list of managed devices and select an administration group in the window that opens.

    The list displays only the managed devices for the selected administration group.

  3. Find your device in the list and click on its name.
  4. This opens a managed device properties window; in that window, go to the Applications tab.
  5. In the list of applications installed on the device, click Kaspersky Endpoint Security.
  6. In the application properties window that opens, on the Application settings tab, select Detection and Response and click the Endpoint Detection and Response Optimum link.
  7. Under Network isolation, click Configure device unblocking.
  8. This opens the Configure device unblocking window; in that window, select the Unblock an automatically isolated device after check box and in the input field under it, specify the period in hours after which the device must be automatically unblocked.
  9. Save your changes.
Page top