Viewing information about nodes with application components installed and about network interfaces on nodes
Users with the Administrator role and users with the Operator role can both view information about nodes with application components installed and about network interfaces on nodes.
To view information about nodes and network interfaces:
- Connect to the Kaspersky Industrial CyberSecurity for Networks Server through a web browser.
- Select the Settings section.
The Deployment tab displays tiles of nodes (on the left) and tiles of the network interfaces detected on these nodes (on the right of each node).
- If you want to view expanded information (including displaying the names of fields), select the tile of the relevant node or network interface.
The details area appears in the right part of the web interface window.
Displayed information about nodes with application components installed
The following information is displayed for nodes:
- Node name defined during installation of application components on this node.
- Current state of the node indicated as an icon and text description (in the details area, the icon and text description are displayed in the State field). Possible states:
OK. The node is available, and no application messages about non-critical malfunctions or disrupted operation were received from this node.
Non-critical malfunction. The node is available, and application messages with the State unknown or Malfunction status were received from this node.
Operation disrupted. The node is available, and application messages with the Moderate malfunction, Critical malfunction or Fatal malfunction status were received from this node.- No connection. The node is unavailable.
- IP address (it is displayed in the IP address field in the details area).
- Application component installed on the node: Server or Sensor (it is displayed in the Node type field in the details area).
Displayed information about network interfaces
The following information is displayed for network interfaces:
- Icon showing if a network cable is connected to the Ethernet port of the network interface (it is displayed in the Connection field in the details area). The following icons are provided:
– the network cable is connected.
– the network cable is disconnected.
The icon blinks when Ethernet port blink mode is enabled.
- Name of the network interface in the operating system (it is displayed in the Network interface field in the details area).
- MAC address (it is displayed in the MAC address field in the details area).
- IP address. If multiple IP addresses are detected on a network interface, the network interface tile displays only one of them and the details area displays no more than 16 IP addresses.
- Rate of incoming traffic received by the network interface.
If a monitoring point has been added to the network interface, the following additional information is displayed.
- Monitoring point name.
- Current state of the monitoring point indicated as an icon and text description (in the details area, the icon and text description are displayed in the State field). Possible states:
- OK. The monitoring point is available.
- Switchover. The operating mode of the monitoring point is being changed.
- Error. An error was detected when switching over the operating mode of the monitoring point.
- Current operating mode of the monitoring point. In the network interface tile, information about the current mode is displayed next to the current status field (except the Switchover state. In the details area, information about the current state is displayed in the Mode field. The following modes are provided:
- Enabled.
- Disabled.