Connecting to a sensor through the web interface

When you are connected to a sensor via the web interface, the following actions are available on the sensor web interface page:

Download a communication data package to the sensor for connecting to the Kaspersky Industrial CyberSecurity for Networks Server.
View the fingerprint of the certificate signing request to compare it with the fingerprint on the Server web interface page if the sensor is being connected to the Server automatically over the network.
View information about the status of the connection between the sensor and the Server.

To change sensor settings, manage monitoring points and technologies, and monitor the status of the node, connect to the application Server via the web interface.

You can use any supported browser for connecting to the Sensor via the web interface. This connection can be established from a computer that can access the sensor computer over the network.

To connect to a Kaspersky Industrial CyberSecurity for Networks sensor:

Open your browser and enter the following into the address bar:
https://<sensor name>:<port>

where:

<sensor name> is the IP address or name of the sensor computer used by the web server of the sensor.
<port> is the port number used by the web server of the sensor.

If the default port number (443) is used for the sensor web server, you only need to enter the IP address or computer name of the sensor into the address bar. In this case, the HTTPS protocol and the port number will be automatically determined.

The Kaspersky Industrial CyberSecurity for Networks sensor web interface page opens in the browser window. The browser tab for the web interface page displays the sensor name defined when it was added.