Viewing the connectors table

The connectors table is displayed on the Connectors tab in the Settings → Connectors section.

The connector settings are displayed in the following columns of the table:

• Name

  Defined name of the connector.

• Connector ID

  ID assigned to the connector when it was created.

• Enabled

  Indicates whether the Server is ready for interaction with application modules of the connector. If this setting has a value of No, the Server does not accept requests from application modules of the connector.

• Status

  Operating status of application modules of the connector. The following statuses are available:

  • Awaiting registration – after adding an unmanageable connector or creating a new communication data package for the unmanageable connector, no connection has been established through this connector.
  • Switchover – the operating status of application modules of the connector is switched from a status of Off to On, or vice versa.
  • Off – the Server does not accept requests from application modules of the connector. If the connector is manageable, the command to stop running is sent to its application modules.
  • On – a successful connection was established through this connector using the certificate created for this connector.
  • Error – an error occurred when attempting to perform actions with the application modules of the connector.
• Type

  Icon and name of the connector type.

• Last connection

  Date and time of the last connection through this connector.

• Manageable

  Indicates that the connector is manageable. If this setting has a value of No, the connector is either unmanageable or is configured to ignore the functions of a manageable connector.

• Changed

  Date and time of the last modification of the connector settings.

• Description

  Defined description of the connector.

When viewing the connectors table, you can use the configuration, filter, search, and sorting functions.

Page top