About address space rules

The rules of address spaces are displayed in the Rules blocks within address space descriptions. Information about rules is displayed in the address space header and in the rules table.

The settings of address space rules are displayed in the following columns of the table:

• Origin

  Type of source of incoming address information and list of selected data sources. The following types of data sources are available:

  • Monitoring points – monitoring points selected for the rule.
  • Integration servers – integration servers selected for the rule (the data on address information received from the selected integration servers will satisfy the address space rule).
  • Active polling modules – active polling module connectors selected for the rule (the data on address information received from the selected active polling modules will satisfy the address space rule).

  The data sources must be specified in the address space rules after adding the objects to be used as sources to the application. For example, connectors for the Active polling modules data source must be specified after adding connectors of the Active poll type.

• OSI model layers

  Selected layers of the Open Systems Interconnection (OSI) model for an address space rule. A rule can be configured for addresses of the following OSI layers:

  • Data Link (L2) – MAC addresses.
  • Network (L3) – IP addresses.
  • Data Link and Network (L2 and L3) – MAC addresses and IP addresses.
• VLAN ID

  IDs of virtual local area networks (VLAN) that are applied when using VLAN technology in accordance with the IEEE 802.1q standard. When used for an address space rule, the VLAN ID may take the following values:

  • Any are used – VLAN technology is used for network interactions between devices, and any VLAN IDs can be used.
  • Not used – VLAN technology is not used for network interactions between devices.
  • Any or not used – VLAN technology is either not used for network interactions between devices, or it is used with any VLAN IDs.
  • Fixed values with a list of VLAN IDs – VLAN technology is used for network interactions between devices, and an address space can include only address information that has one of the listed VLAN IDs.
• IP addresses

  IP addresses included in the address space. Addresses can be specified individually, as ranges, or in CIDR subnet address format.

When viewing the rules table, you can use the configuration functions (by clicking the  icon) and search functions.

Page top