The tables below show the default ports that must be open on Administration Servers and on client devices. If you want, you can change default port numbers.
The table below shows the default ports that must be open on Administration Server. However, if you install the Administration Server and the database on different devices, you must make available the necessary ports on the device where the database is located (for example, port 3306 for MySQL Server and MariaDB Server, or port 1433 for Microsoft SQL Server). Please refer to the DBMS documentation for the relevant information.
Ports that must be open on Administration Server
Port number |
Name of the process that opens the port |
Protocol |
Port purpose |
Scope |
|---|---|---|---|---|
8060 |
klcsweb |
TCP |
Transmitting published installation packages to client devices |
Publishing installation packages. You can change the default port number in the Web Server section of the Administration Server properties window in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
8061 |
klcsweb |
TCP (TLS) |
Transmitting published installation packages to client devices |
Publishing installation packages. You can change the default port number in the Web Server section of the Administration Server properties window in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
13000 |
klserver |
TCP (TLS) |
Receiving connections from Network Agents and secondary Administration Servers; also used on secondary Administration Servers for receiving connections from the primary Administration Server (for example, if the secondary Administration Server is in DMZ) |
Managing client devices and secondary Administration Servers. You can change the number of the default port for receiving connections from Network Agents when configuring connection ports; you can change the number of default port for receiving connections from secondary Administration Servers when creating a hierarchy of Administration Servers in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
13000 |
klserver |
UDP |
Receiving information about devices that were turned off from Network Agents |
Managing client devices. You can change the default port number in the Network Agent policy settings in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
13291 |
klserver |
TCP (TLS) |
Receiving connections from Administration Console to Administration Server |
Managing Administration Server. You can change the default port number in the Administration Server properties window in the Administration Console. |
13299 |
klserver |
TCP (TLS) |
Receiving connections from Kaspersky Security Center 13.1 Web Console to the Administration Server; receiving connections to the Administration Server over OpenAPI |
Kaspersky Security Center 13.1 Web Console, OpenAPI. You can change the default port number in the Administration Server properties window (in the Connection ports subsection of the General section) in the Administration Console, or when creating a hierarchy of Administration Servers in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
14000 |
klserver |
TCP |
Receiving connections from Network Agents |
Managing client devices. You can change the default port number when configuring connection ports during the installation of Kaspersky Security Center, or when manually connecting a client device to the Administration Server. |
13111 (only if KSN proxy service is run on the device) |
ksnproxy |
TCP |
Receiving requests from managed devices to KSN proxy server |
KSN proxy server. You can change the default port number in the Administration Server properties window. |
15111 (only if KSN proxy service is run on the device) |
ksnproxy |
UDP |
Receiving requests from managed devices to KSN proxy server |
KSN proxy server. You can change the default port number in the Administration Server properties window. |
17000 |
klactprx |
TCP (TLS) |
Receiving connections for application activation from managed devices (except for mobile devices) |
Activation proxy server for non-mobile devices. You can change the default port number in the Administration Server properties window. |
17100 (only if you manage mobile devices) |
klactprx |
TCP (TLS) |
Receiving connections for application activation from mobile devices |
Activation proxy server for mobile devices. You can change the default port number in the Administration Server properties window. |
19170 (only if you manage mobile devices) |
klserver |
HTTPS (TLS) |
Tunneling connections to managed devices by using the klsctunnel utility |
Remotely connecting to managed devices by using Kaspersky Security Center 13.1 Web Console. You can change the default port number in the Administration Server properties window (in the Additional ports subsection of the General section) in the Administration Console only. |
13292 (only if you manage mobile devices) |
klserver |
TCP (TLS) |
Receiving connections from mobile devices |
Mobile Device Management. You can change the default port number in the Administration Server properties window in the Administration console or in Kaspersky Security Center 13.1 Web Console. |
13294 (only if you manage mobile devices) |
klserver |
TCP (TLS) |
Receiving connections from UEFI protection devices |
Managing UEFI protection client devices. You can change the default port number when connecting mobile devices, or later in the Administration Server properties window (in the Additional ports subsection of the General section) in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
The table below shows the port that must be open on the iOS MDM Server (only if you manage mobile devices).
Port used by Kaspersky Security Center iOS MDM Server
Port number |
Name of the process that opens the port |
Protocol |
Port purpose |
Scope |
|---|---|---|---|---|
443 |
kliosmdmservicesrv
|
TCP (TLS) |
Receiving connections from iOS mobile devices |
Mobile Device Management. You can change the default port number when installing iOS MDM Server. |
The table below shows the port that must be open on Kaspersky Security Center Web Console Server. It can be the same device where Administration Server is installed or a different device.
Port used by Kaspersky Security Center Web Console Server
Port number |
Name of the process that opens the port |
Protocol |
Port purpose |
Scope |
|---|---|---|---|---|
8080
|
Node.js: Server-side JavaScript
|
TCP (TLS) |
Receiving connections from browser to Kaspersky Security Center 13.1 Web Console |
Kaspersky Security Center 13.1 Web Console. You can change the default port number when installing Kaspersky Security Center 13.1 Web Console on a device running Windows or on a Linux platform. If you install Kaspersky Security Center 13.1 Web Console on Linux ALT operating system, you must specify a port number other than 8080, because port 8080 is used by the operating system. |
The table below shows the port that must be open on managed devices where Network Agent is installed.
Ports used by Network Agent
Port number |
Name of the process that opens the port |
Protocol |
Port purpose |
Scope |
|---|---|---|---|---|
15000 |
klnagent
|
UDP |
Management signals from Administration Server to Network Agents |
Managing client devices. You can change the default port number in the Network Agent policy settings in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
15000 |
klnagent |
UDP broadcast |
Getting data about other Network Agents within the same broadcasting domain (the data is then sent to the Administration Server) |
Delivering updates and installation packages. |
Please note that the klnagent process can also request free ports from the dynamic port range of an endpoint operating system. These ports are allocated to the klnagent process automatically by the operating system, so klnagent process can use some ports that are used by another software. If the klnagent process affects that software operations, change the port settings in this software, or change the default dynamic port range in your operating system to exclude the port used by the software affected.
The table below shows the ports that must be open on a managed device with Network Agent installed acting as a distribution point.
Ports used by Network Agent functioning as distribution point
Port number |
Name of the process that opens the port |
Protocol |
Port purpose |
Scope |
|---|---|---|---|---|
13000 |
klnagent |
TCP (TLS) |
Receiving connections from Network Agents |
Managing client devices, delivering updates and installation packages. You can change the default port number in the distribution point properties window in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
13111 (only if KSN proxy service is run on the device)
|
ksnproxy
|
TCP
|
Receiving requests from managed devices to KSN proxy server
|
KSN proxy server. You can change the default port number in the distribution point properties window in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
15001 |
klnagent |
UDP |
Multicasting for Network Agents |
Delivering updates and installation packages. You can change the default port number in the distribution point properties window in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
15111 (only if KSN proxy service is run on the device)
|
ksnproxy |
UDP |
Receiving requests from managed devices to KSN proxy server |
KSN proxy server. You can change the default port number in the distribution point properties window in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |
13295 (only if you use the distribution point as a push server) |
klnagent |
TCP (TLS) |
Sending push notifications to managed devices |
Push server. You can change the default port number in the distribution point properties window in the Administration Console or in Kaspersky Security Center 13.1 Web Console. |