Out-of-office users of laptops (hereinafter also referred to as "devices") may need to change the method of connecting to an Administration Server or switch between Administration Servers depending on the current location of the device on the enterprise network.
Connection profiles are supported only for devices running Windows and macOS.
Using different addresses of a single Administration Server
Devices with Network Agent installed can connect to the Administration Server either from the organization's intranet or from the internet. This situation may require Network Agent to use different addresses for connection to Administration Server: the external Administration Server address for the internet connection and the internal Administration Server address for the internal network connection.
To do this, add a profile for connection to Administration Server from the internet in the Network Agent policy properties (in the Application settings → Network → Connection profiles → Administration Server connection profiles section). In the profile creation window, disable the Use to receive updates only option and make sure that the Synchronize connection settings with the Administration Server settings specified in this profile option is selected. If you use a connection gateway to access Administration Server (for example, in a Kaspersky Security Center configuration as that described in Internet access: Network Agent as connection gateway in DMZ), you must specify the address of the connection gateway in the corresponding field of the connection profile.
Switching between Administration Servers depending on the current network
If the organization has multiple offices with different Administration Servers and some of the devices with Network Agent installed move between them, you need Network Agent to connect to the Administration Server of the local network in the office where the device is currently located.
In this case, create a profile for connection to Administration Server in the Network Agent policy properties for each of the offices, except for the home office where the original home Administration Server is located. Specify the addresses of Administration Servers in connection profiles and enable or disable the Use to receive updates only option:
After that, you must set up the conditions of switching to the newly created profiles: at least one condition for each of the offices, except for the home office. Every condition's purpose consists in detection of items that are specific for an office's network environment. If a condition is true, the corresponding profile gets activated. If none of the conditions is true, Network Agent switches to the home Administration Server.