Configuring IP address settings for SVM

For this step, you must specify IP addressing settings for all SVMs. You can use dynamic or static IP addressing.

If you want to specify all network settings of the SVM manually, select:

Select Static IP addressing. This opens a table containing the following information:
- Hypervisor address
  IP address in IPv4 format or the fully qualified domain name (FQDN) of the hypervisor on which the SVM will be deployed.
  
  The Hypervisor address column is displayed if you are deploying the SVM to a virtual infrastructure based on Microsoft Hyper-V, XenServer, VMware vSphere, KVM, Proxmox VE, Basis, Skala-R, HUAWEI FusionSphere, Nutanix Acropolis, Alt Virtualization Server, Astra Linux, or Numa vServer.
- OpenStack project name
  Name of the OpenStack project selected for SVM deployment, as well as project path in the infrastructure.
  
  The OpenStack project name column is displayed if you are performing SVM deployment in a virtual infrastructure managed by the OpenStack platform, VK Cloud platform, or TIONIX Cloud Platform.
- SVM name
  The name that was defined when specifying SVM settings.
- Network name
  The name of the virtual network that the SVM uses to connect to Light Agents, the Integration Server and the Kaspersky Security Center Administration Server.
Specify the following IP addressing settings for each SVM:
- DNS server
- alternative DNS server
- SVM IP address
- Subnet mask
- gateway
If you specified several virtual networks for the SVM at the previous step, specify the settings for each virtual network.

If you want to use DHCP network settings for all SVMs:

Select Dynamic IP addressing (DHCP).
By default, the IP address of the DNS server and the IP address of the alternative DNS server received over the DHCP protocol are used for each SVM (the Use list of DNS servers received via DHCP check box is selected). If you specified several virtual networks for the SVM at the previous step, by default the network settings for the SVM are received from the DHCP server of the first virtual network in the list of the specified virtual networks.
If you want to manually specify the IP address of the DNS server and alternative DNS server, clear the Use list of DNS servers received via DHCP check box. This opens a table containing the following information:
- Hypervisor address
  IP address in IPv4 format or the fully qualified domain name (FQDN) of the hypervisor on which the SVM will be deployed.
  
  The Hypervisor address column is displayed if you are deploying the SVM to a virtual infrastructure based on Microsoft Hyper-V, XenServer, VMware vSphere, KVM, Proxmox VE, Basis, Skala-R, HUAWEI FusionSphere, Nutanix Acropolis, Alt Virtualization Server, Astra Linux, or Numa vServer.
- OpenStack project name
  Name of the OpenStack project selected for SVM deployment, as well as project path in the infrastructure.
  
  The OpenStack project name column is displayed if you are performing SVM deployment in a virtual infrastructure managed by the OpenStack platform, VK Cloud platform, or TIONIX Cloud Platform.
- SVM name
  The name that was defined when specifying SVM settings.
Specify the IP addresses of DNS servers in the DNS server and Alternative DNS server table columns.

Proceed to the next step of the wizard.

Page top