Saving and selecting incident filter configuration

In KUMA, you can save changes to incident table settings as filters. Filter configurations are saved on the KUMA Core server and are available to all KUMA users of the tenant for which they were created.

To save the current filter settings:

1. In the Incidents section of KUMA, open the Select filter drop-down list.
2. Select Save current filter.

   A window will open for entering the name of the new filter and selecting the tenant that will own the filter.

3. Enter a name for the filter configuration. The name must be unique for alert filters, incident filters, and event filters.
4. In the Tenant drop-down list, select the tenant that will own the filter and click Save.

The filter configuration is now saved.

To select a previously saved filter configuration:

1. In the Incidents section of KUMA, open the Select filter drop-down list.
2. Select the configuration you want.

The filter configuration is now active.

You can select the default filter by putting an asterisk to the left of the required filter configuration name in the Filters drop-down list.

To reset the current filter settings:

open the Filters drop-down and select Clear filter.

Page top