This is an optional step of the Installation Wizard. On the Enrichment tab of the Installation Wizard, you can select or create a resource for enrichment rules and indicate which data from which sources should be added to correlation events created by the correlator. There can be more than one enrichment rule. You can add them by clicking the Add button and can remove them by clicking the button.
To add an existing enrichment rule to a set of resources:
Click Add.
This opens the enrichment rules settings block.
In the Enrichment rule drop-down list, select the relevant resource.
The enrichment rule is added to the set of resources for the correlator.
To create a new enrichment rule in a set of resources:
Click Add.
This opens the enrichment rules settings block.
In the Enrichment rule drop-down list, select Create new.
In the Source kind drop-down list, select the source of data for enrichment and define its corresponding settings:
This type of enrichment is used when a constant needs to be added to an event field.
When choosing this type, you must specify the value to add to the event field in the Constant field. The value should not be longer than 255 Unicode characters. If you leave this field blank, the existing event field value will be cleared.
This type of enrichment is used if you need to add a value from the dictionary to the event field.
When this type is selected in the Dictionary name drop-down list, you must select the dictionary that will provide the values. In the Key fields settings block, you must use the Add field button to select the event fields whose values will be used for dictionary entry selection.
This type of enrichment is used when you need to write a value from another event field to the current event field.
When this type is selected in the Source field drop-down list, you must select the event field from where the value will be copied to the target field.
In the Conversion settings block, you can create rules for modifying the original data before it is written to the KUMA event fields. The conversion type can be selected from the drop-down list. You can use the Add conversion and Delete buttons to add or delete a conversion, respectively. The order of conversions is important.
Conversions are changes that can be applied to a value before it gets written to the event field. The conversion type is selected from a drop-down list.
Available conversions:
lower—is used to make all characters of the value lowercase
upper—is used to make all characters of the value uppercase
regexp—is used to apply a RE2 regular expression to the value. When this conversion type is selected, the field appears where regular expression should be added.
substring—is used to extract characters in the position range specified in the Start and End fields. These fields appear when this conversion type is selected.
replace—is used to replace specified character sequence with the other character sequence. When this type of conversion is selected, new fields appear:
Replace chars—in this field you can specify the character sequence that should be replaced.
With chars—in this field you can specify the characters sequence should be used instead of replaced characters.
trim—used to simultaneously remove the characters specified in the Chars field from the leading and end positions of the value. The field appears when this type of conversion is selected. For example, a trim conversion with the value Micromon for the value Microsoft-Windows-Sismon results in the value soft-Windows-Sys.
append is used to add the characters specified in the Constant field to the end of the event field value. The field appears when this type of conversion is selected.
prepend—used to prepend the characters specified in the Constant field to the start of the event field value. The field appears when this type of conversion is selected.
replace with regexp—is used to replace RE2 regular expression results with the character sequence.
Expression—in this field you can specify the regular expression which results that should be replaced.
With chars—in this field you can specify the characters sequence should be used instead of replaced characters.
This type of enrichment is used when you need to write a value obtained by processing Go templates into the event field.
When this type is selected, a Go template must be specified in the Template field.
Event field names are passed in the {{.EventField}} format, where EventField is the name of the event field from which the value must be passed to the script.
Example: Attack on {{.DestinationAddress}} from {{.SourceAddress}}
This type of enrichment is used to send requests to a private network DNS server to convert IP addresses into domain names or vice versa.
Available settings:
URL—in this field, you can specify the URL of a DNS server to which you want to send requests. You can use the Add URL button to specify multiple URLs.
RPS—maximum number of requests sent to the server per second. The default value is 1000.
Workers—maximum number of requests per one point in time. The default value is 1.
Max tasks—maximum number of simultaneously fulfilled requests. By default, this value is equal to the number of vCPUs of the KUMA Core server.
Cache TTL—the lifetime of the values stored in the cache. The default value is 60.
Cache disabled—you can use this drop-down list to enable or disable caching. Caching is enabled by default.
This type of enrichment is used to add information from CyberTrace data streams to event fields.
Available settings:
URL (required)—in this field, you can specify the URL of a CyberTrace server to which you want to send requests.
Number of connections—maximum number of connections to the CyberTrace server that can be simultaneously established by KUMA. By default, this value is equal to the number of vCPUs of the KUMA Core server.
RPS—maximum number of requests sent to the server per second. The default value is 1000.
Timeout—amount of time to wait for a response from the CyberTrace server, in seconds. The default value is 30.
Mapping (required)—this settings block contains the mapping table for mapping KUMA event fields to CyberTrace indicator types. The KUMA field column shows the names of KUMA event fields, and the CyberTrace indicator column shows the types of CyberTrace indicators.
Available types of CyberTrace indicators:
ip
url
hash
In the mapping table, you must provide at least one string. You can use the Add row button to add a string, and can use the button to remove a string.
In the Target field drop-down list, select the KUMA event field to which you want to write the data.
Use the Debug drop-down list to indicate whether or not to enable logging of service operations. Logging is disabled by default.
In the Filter section, you can specify conditions to identify events that will be processed by the enrichment rule resource. You can select an existing filter resource from the drop-down list, or select Create new to create a new filter.
If you want to keep the filter as a separate resource, set the Save filter toggle switch.
In this case, you will be able to use the created filter in various services.
The toggle switch is turned off by default.
If you toggle the Save filter switch on, enter a name for the created filter resource in the Name field. The name must contain from 1 to 128 Unicode characters.
In the Conditions settings block, specify the conditions that the events must meet:
Click the Add condition button.
In the Left operand and Right operand drop-down lists, specify the search parameters.
Depending on the data source selected in the Right operand field, you may see fields of additional parameters that you need to use to define the value that will be passed to the filter. For example, when choosing active list you will need to specify the name of the active list, the entry key, and the entry key field.
In the operator drop-down list, select the relevant operator.
<—the left operand is less than the right operand.
<=—the left operand is less than or equal to the right operand.
>—the left operand is greater than the right operand.
>=—the left operand is greater than or equal to the right operand.
inSubnet—the left operand (IP address) is in the subnet of the right operand (subnet).
contains—the left operand contains values of the right operand.
startsWith—the left operand starts with one of the values of the right operand.
endsWith—the left operand ends with one of the values of the right operand.
match—the left operand matches the regular expression of the right operand. The RE2 regular expressions are used.
inActiveList—this operator has only one operand. Its values are selected in the Key fields field and are compared with the entries in the active list selected from the Active List drop-down list.
inCategory—the asset in the left operand is assigned at least one of the asset categories of the right operand.
inActiveDirectoryGroup—the Active Directory account in the left operand belongs to one of the Active Directory groups in the right operand.
TIDetect—this operator is used to find events using CyberTrace Threat Intelligence (TI) data. This operator can be used only on events that have completed enrichment with data from CyberTrace Threat Intelligence. In other words, it can only be used in collectors at the destination selection stage and in correlators.
If necessary, select the do not match case check box. When this check box is selected, the operator ignores the case of the values.
The selection of this check box does not apply to the InSubnet, InActiveList, InCategory or InActiveDirectoryGroup operators.
This check box is cleared by default.
If you want to add a negative condition, select If not from the If drop-down list.
You can add multiple conditions or a group of conditions.
If you have added multiple conditions or groups of conditions, choose a search condition (and, or, not) by clicking the AND button.
If you want to add existing filters that are selected from the Select filter drop-down list, click the Add filter button.
You can view the nested filter settings by clicking the button.
The new enrichment rule was added to the set of resources for the correlator.
Proceed to the next step of the Installation Wizard.
button.
button.