Configuring connection between KUMA and FreeIPA

You can connect only to one FreeIPA domain. To do so, you must configure a connection to the domain controller.

To configure a connection to a FreeIPA domain controller:

1. In the application web interface, select Settings → Domain authorization.
2. In the Authorization type drop-down list, select FreeIPA.
3. In the FreeIPA settings block, in the Base DN field, enter the DistinguishedName of the root record to search for access groups in the FreeIPA catalog service. Record format: dc=example,dc=com.
4. In the URL field, indicate the address of the domain controller in the format <hostname or IP address of server>:<port>.

   In case of server availability issues, you can specify up to three servers with domain controllers by separating them with commas. All of the specified servers must reside in the same domain.

5. If you want to use TLS encryption for the connection with the domain controller, select one of the following options from the TLS mode drop-down list:
   • startTLS.

     When the startTLS method is used, first it establishes an unencrypted connection over port 389, then it sends an encryption request. If the STARTTLS command ends with an error, the connection is terminated.

     Text exchange protocol enhancement that lets you create an encrypted connection (TLS or SSL) directly over an ordinary TCP connection instead of opening a separate port for the encrypted connection.

     Make sure that port 389 is open. Otherwise, a connection with the domain controller will be impossible.

   • ssl.

     When using SSL, an encrypted connection is immediately established over port 636.

   • insecure.

   When using an encrypted connection, it is impossible to specify an IP address as a URL.

6. If TLS encryption is enabled, the Secret field becomes required and you must specify a secret of the 'certificate' type in that field. If you previously uploaded a secret, select it from the Secret drop-down list. If necessary, click the button to create a new secret of the 'certificate' type and select the secret from the drop-down list.
7. In the Timeout in seconds field, indicate the amount of time to wait for a response from the domain controller server. The default value is 0.

   If multiple addresses are indicated in the URL field, KUMA waits for the specified number of seconds for a response from the first server. If no response is received during that time, the application contacts the next server. If none of the indicated servers responds during the specified amount of time, the connection will be terminated with an error.

8. In the Custom integration secret drop-down list, select a secret with the 'credentials' type.

   If you want to upload a new secret of the 'credentials' type, click the button on the right of the Custom integration secret drop-down list. This opens the Secret window; in that window, in the Name field, enter the name of the secret that will be displayed in the list after it is saved. In the User field, specify the DistinguishedName in the following format: uid=admin,cn=users,cn=accounts,dc=ipa,dc=test. Enter the Password and click Save.

   The secret is uploaded and becomes available for selection in the Custom integration secret drop-down list.

9. If you want to configure domain authentication for a user with the KUMA general administrator role, use the General administrators group field to specify the DistinguishedName of the FreeIPA group containing the user.

   If the user belongs to several groups within the same tenant, the role with the least privileges is used.

   Filter input example: CN=KUMA team,OU=Groups,OU=Clients,DC=test,DC=domain.

10. Click the Save button.

A connection with the FreeIPA domain controller is now configured.

You can also check the connection for the previously entered domain controller connection settings.

To check the connection to the domain controller:

1. In the application web interface, select Settings → Domain authorization.
2. In the Authorization type drop-down list, select FreeIPA.
3. In the FreeIPA settings block, select the relevant secret in the User credentials field.

   If necessary, you can create a new secret by clicking the button or change the settings of an existing secret by clicking the button. If integration with FreeIPA is enabled, the secret selection is always reset when the page is loaded.

4. Click Test.

   After clicking the Test button, the system tests the connection with the domain and returns a notification with the test results. The system does not check if the users can log in or if the user group is configured correctly.

For domain authentication, add the groups for the KUMA user roles.

You can specify the groups only for the roles that require the configuration of domain authentication. You can leave the rest of the fields empty.

To add groups of user roles:

1. In the application web interface, select Settings → Domain authorization.
2. Under Administration groups, click Add role groups.
3. In the Tenant drop-down list, select the tenant of the users for whom you want to configure domain authentication.
4. In the Selected roles drop-down list, specify the roles for the user. You can select multiple roles. The following values are available:
   • Tenant administrator
   • Tier 2 analyst
   • Tier 1 analyst
   • Junior analyst

   After you select the roles, a group filter field is displayed for each role. In the fields for each role, specify the DistinguishedName of the domain group. The users of this domain group must have the capability to perform authentication with their domain accounts. Group input example: CN=KUMA team,OU=Groups,OU=Clients,DC=test,DC=domain.

   You can define a separate set of role filters for each tenant.

   If no filter is specified for a role, this means that conditions for creating an account through domain authentication are not specified for that role. Authentication with that role is impossible.

   After the first authentication under a domain account, domain user cards are created for users in the Settings → Users section. For a domain user, the ability to change the main role (General administrator, Tenant administrator, Tier 2 analyst, Tier 1 analyst, Junior analyst) is blocked in the user card, while additional roles can be added or removed (Access to CII, Interaction with NCIRCC, Access to shared resources), including management of additional role assignment to tenants. Roles assigned in the Domain authorization section and roles assigned in the user card supplement each other. If the General administrator role was assigned to a domain user, and the General administrator role was subsequently revoked, additional roles must be reassigned in the user card in the Settings → Users section.

   You can specify only one domain group for each role. If you want to specify multiple groups, you must repeat steps 2 to 4 for each group while specifying the same tenant.

5. If necessary, repeat steps 2–4 for each tenant for which you want to configure domain authentication with the following roles: Junior analyst, Tier 1 analyst, Tier 2 analyst, or Tenant administrator.
6. Click the Save button.

The groups of user roles will be added. The defined settings will be applied the next time the user logs in to the KUMA web interface.

After the first authentication of the user, information about this user is displayed under Settings → Users. The Login and Password fields received from the domain cannot be edited. The user role will also be unavailable for editing. To edit a role, you will have to change the user role groups. Changes to a role are applied after the next authentication of the user. The user continues working under the current role until the current session expires.

If the user name or email address is changed in the domain account properties, these changes must be manually made in the KUMA account.

Page top