Configuring the WebSocket Connector

Kaspersky MLAD uses the WebSocket Connector to receive data and send messages about incident registration via the WebSocket protocol.

System administrators can configure the WebSocket Connector. The instructions in this section are provided for information purposes.

To configure the WebSocket Connector:

1. In the lower-left corner of the page, click the  button.

   You will be taken to the administrator menu.

2. Select System parameters → WebSocket Connector.

   A list of options appears on the right.

3. In the WebSocket server web address field, specify the web address of the WebSocket server that the WebSocket Connector will interact with.

   Enter the web address in the format: WebSocket protocol://address:port/.

4. If it is necessary to use a secure connection and a self-signed certificate is installed on the WebSocket server, add the root certificate for the WebSocket server using the Browse button under the CA certificate setting.

   To delete the certificate file, click the Clear icon (). To save the certificate file on your computer, click the Download icon ().

5. If it is necessary to use a secure connection and client authentication is enabled on the WebSocket server, do the following:
   • Add the WebSocket client application certificate by using the Browse button under the Client certificate setting.
   • Add the key to the WebSocket client application certificate by using the Browse button under the Key to client certificate setting.

   It is recommended to use a certificate created according to the X.509 standard with a certificate key length of at least 4096 bits.

   To delete the certificate file or certificate key, click the Clear icon () in the corresponding field. To save the certificate file or certificate key on your computer, click the Download icon () in the corresponding field.

6. In the Data format drop-down list, select the format to receive data from external systems and send incident alerts.

   The following options are available: JSONBatch, Topic, SmartHome, KISG.

   The default value of this parameter is JSONBatch.

   If none of the incident data and alert formats suits you, you can contact Kaspersky Lab experts to add the required format.

7. If you have selected the Topic data format, add a configuration file containing the connector settings for this data format using the Browse button under the Connector configuration file setting.

   To delete the connector configuration file, click the Clear icon (). To save the connector configuration file on your computer, click the Download icon ().

8. If you need to recalculate the tag values based on the parameter values specified in the preset file, turn on the Scale obtained tag values toggle switch.

   By default, scaling of the received data is disabled.

9. To send alerts about the incidents registered in Kaspersky MLAD to a WebSocket server, enable the Submit incidents option.
10. Click the Save button.

Kaspersky MLAD will receive data and send messages about incident registration via the WebSocket protocol.

Page top