Creating an IP set

You can create an IP set in a firewall template or on a CPE device. An IP set created in a firewall template is automatically created on all CPE devices that use this firewall template.

To create an IP set:

  1. Create an IP set in one of the following ways:
    • If you want to create an IP set in a firewall template, go to the SD-WAN → Firewall templates menu section, click the firewall template, and select the IP sets tab.
    • If you want to create an IP set on a CPE device, go to the SD-WAN → CPE menu section, click the CPE device, select the Firewall settings → IP sets tab, and select the Override check box.

    A table of IP sets is displayed.

  2. Click + IP set.
  3. This opens a window; in that window, in the Name field, enter the name of the IP set. Maximum length: 255 characters.
  4. In the Direction drop-down list, select whether the IP set is associated with the source or the destination of traffic packets:
    • Match source if the IP set contains source IP addresses or subnets.
    • Match destination if the IP set contains destination IP addresses or subnets.
  5. In the Type drop-down list, select whether the set contains IP addresses or subnets.
    • Set of subnets if the IP set contains subnets.
    • Set of IPs if the IP set contains IP addresses.
  6. If in the Type drop-down list, you selected Set of subnets, specify a subnet. To do so, under Entries list, click + Add and enter an IPv4 prefix. You can specify ranges of IPv4 prefix octets using square brackets, for example, 192.[165-168].2.0/24.

    The subnet is specified and displayed under Entries list. You can specify multiple subnets or delete a subnet. To delete a subnet, click the delete icon next to it.

  7. If in the Type drop-down list, you selected Set of IPs, specify an IP address. To do so, under Entries list, click + Add and enter an IPv4 address. You can specify ranges of IPv4 address octets using square brackets, for example, 192.[165-168].2.0.

    The IP address is specified and displayed in the Entries list section. You can specify multiple IP addresses or delete an IP address. To delete an IP address, click the delete icon next to it.

  8. Click Create.

    The IP set is created and displayed in the table.

  9. In the upper part of the settings area, click Save to save the settings of the firewall template or CPE device.
Page top