Managing threshold constraints

To display the table of threshold constraints, go to the Infrastructure menu section, click Management → Configuration menu next to the controller, go to the Constraints section, and select the Thresholds tab. Information about threshold constraints is displayed in the following columns of the table:

• Name is the name of the threshold constraint.
• Unsolicited indicates whether the threshold constraint excludes a link from Auto-TE path calculation if the Unsolicited check box is selected in link monitoring settings:
  • Y
  • N
• Error level indicates whether the threshold constraint excludes a link from Auto-TE path calculation if the errors-per-second threshold is reached on the link:
  • Y
  • N
• Utilization indicates whether the threshold constraint excludes a link from Auto-TE path calculation if the utilization threshold is reached on the link, as a percentage of the bandwidth of the source service interface:
  • Y
  • N
• Latency indicates whether the threshold constraint excludes a link from Auto-TE path calculation if the delay threshold (in milliseconds) is reached for traffic passing through the link:
  • Y
  • N
• Jitter indicates whether the threshold constraint excludes a link from Auto-TE path calculation if the jitter threshold (in milliseconds) is reached for traffic passing through the link:
  • Y
  • N
• Packet loss indicates whether the threshold constraint excludes a link from Auto-TE path calculation if the packet loss threshold (as a percentage value) is reached on the link:
  • Y
  • N

  You can specify monitoring thresholds when configuring link monitoring.

In this section Creating a threshold constraint Editing a threshold constraint Deleting a threshold constraint

Page top